EUVIMEDEUVIMED entdecken
Crossref

Mechanical Properties of Sustainable Paving Blocks Using Fly Ash and Polypropylene Plastic Waste

Deded Eka Sahputra, Fakhrul Siddiq, Nanang Fatchurrohman

Indonesian Journal of Computing, Engineering, and Design (IJoCED) · 14.05.2026 · 8 (1) · 66-73

DOI: 10.35806/ijoced.v8i1.596 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Indonesian Journal of Computing, Engineering, and Design (IJoCED), online erschienen am 14.05.2026. Verfasst von Deded Eka Sahputra und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing generation of industrial and plastic waste has encouraged the development of sustainable construction materials. This study investigates the mechanical properties of zero-cement paving blocks utilizing Polypropylene (PP) plastic waste as the sole binder and fly ash as a sand substitute. A direct thermo-mechanical melting process at 180°C–200°C was employed without the use of water or chemical activators. To ensure sufficient binder volume, the PP ratio was fixed at 4 parts. Specimens were tested for compressive strength and water absorption according to the Indonesian National Standard (SNI 03-0691-1996). The results demonstrated a clear dependency between the filler ratio and mechanical performance; a 25% substitution of sand with fly ash achieved the optimal performance, yielding a maximum compressive strength of 11.59± 0.84 MPa and a remarkably low water absorption rate of 0.75 ± 0.31%, while the lowest water absorption of 0.62 ± 0.07% was achieved by the control mixture. However, increasing the fly ash substitution to 50% resulted in a strength reduction due to the inability of the fixed PP matrix to completely encapsulate the high surface area of the fine fly ash particles. Although classified as Quality D paving blocks, this purely waste-derived composite presents a highly viable, eco-friendly solution specifically targeted for light-duty infrastructure applications, such as pedestrian walkways and city parks.

Zitieren

APA

Sahputra, D. E., Siddiq, F., & Fatchurrohman, N. (2026). Mechanical Properties of Sustainable Paving Blocks Using Fly Ash and Polypropylene Plastic Waste. Indonesian Journal of Computing, Engineering, and Design (IJoCED), 8(1), 66-73. https://doi.org/10.35806/ijoced.v8i1.596

Vancouver

Sahputra DE, Siddiq F, Fatchurrohman N. Mechanical Properties of Sustainable Paving Blocks Using Fly Ash and Polypropylene Plastic Waste. Indonesian Journal of Computing, Engineering, and Design (IJoCED). 2026;8(1):66-73. doi:10.35806/ijoced.v8i1.596

BibTeX
@article{Sahputra2026,
  author = {Sahputra, Deded Eka and Siddiq, Fakhrul and Fatchurrohman, Nanang},
  title = {Mechanical Properties of Sustainable Paving Blocks Using Fly Ash and Polypropylene Plastic Waste},
  journal = {Indonesian Journal of Computing, Engineering, and Design (IJoCED)},
  year = {2026},
  volume = {8},
  number = {1},
  pages = {66--73},
  doi = {10.35806/ijoced.v8i1.596}
}
Kostenlos starten →