Performance and Techno-Economic Feasibility Analysis of Controlled Mechanical Melting Machine for Upcycling Plastic Waste into Sustainable Paving Blocks
Glovento Journal of Integrated Studies · 29.10.2026 · 2
DOI: 10.68246/gjis.v2.91 ↗Kurz gefasst
Fachartikel in der Zeitschrift Glovento Journal of Integrated Studies, online erschienen am 29.10.2026. Verfasst von Edwin Pieter Dominggus Hattu und 3 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: Ministry of Higher Education, Science, and Technology of the Republic of Indonesia.
Abstract (Originalsprache)
Plastic waste management is an urgent global challenge, driving the need for innovation in the circular economy, particularly in the construction sector. This study aims to analyze the performance and techno-economic feasibility of the Controlled Mechanical Melting Machine (CM3) developed for the upcycling of plastic waste into paving blocks. The research method applied systematic engineering experiments and material testing, starting from the identification of dominant plastic waste (PP, HDPE, PET) in East Nusa Tenggara (NTT), the design and fabrication of the CM3 prototype, thermal performance testing, to the production and quality evaluation of paving blocks. The machine performance test results showed that CM3 was able to melt PP plastic with the highest efficiency (time to reach 200°C: 8–10 minutes, fuel consumption: 1.4–1.6 L/cycle). Upcycled paving blocks with a composition of 30–50% PP plastic meet technical standards for non-structural applications, with an average compressive strength of 7.16 MPa and very low water absorption (1.2%) compared to cement paving blocks (6–8%). Financial feasibility analysis reveals a highly attractive business potential with a Break-Even Point (BEP) of 6.5 months, a Return on Investment (ROI) of 452% over 3 years, and a positive Net Present Value (NPV) > IDR 100 million, despite challenges such as premium pricing and limited market adoption. This study concludes that CM3 technology is technically and financially viable as a small-to-medium-scale upcycling solution, directly contributing to plastic waste reduction and the achievement of Sustainable Development Goals (SDGs), particularly SDGs 11, 12, and 9.
Förderung
- Ministry of Higher Education, Science, and Technology of the Republic of Indonesia
Zitieren
APA
Hattu, E. P. D., Sudarmadji, P. W., Liem, F. N., & Batilmurik, R. W. (2026). Performance and Techno-Economic Feasibility Analysis of Controlled Mechanical Melting Machine for Upcycling Plastic Waste into Sustainable Paving Blocks. Glovento Journal of Integrated Studies, 2. https://doi.org/10.68246/gjis.v2.91
Vancouver
Hattu EPD, Sudarmadji PW, Liem FN, Batilmurik RW. Performance and Techno-Economic Feasibility Analysis of Controlled Mechanical Melting Machine for Upcycling Plastic Waste into Sustainable Paving Blocks. Glovento Journal of Integrated Studies. 2026;2. doi:10.68246/gjis.v2.91
BibTeX
@article{Hattu2026,
author = {Hattu, Edwin Pieter Dominggus and Sudarmadji, Petrisia Widyasari and Liem, Ferdinan Nikson and Batilmurik, Ridolof Wenand},
title = {Performance and Techno-Economic Feasibility Analysis of Controlled Mechanical Melting Machine for Upcycling Plastic Waste into Sustainable Paving Blocks},
journal = {Glovento Journal of Integrated Studies},
year = {2026},
volume = {2},
doi = {10.68246/gjis.v2.91}
}
EUVIMED