EUVIMEDEUVIMED entdecken
Crossref

An imaged-based inverse finite element method to determine in-vivo mechanical properties of the human trabecular meshwork

Anup D. Pant, Larry Kagemann, Joel S. Schuman, Ian A. Sigal, Rouzbeh Amini

Modeling and Artificial Intelligence in Ophthalmology · 2017

DOI: 10.35119/maio.v1i3.48 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Modeling and Artificial Intelligence in Ophthalmology, 2017. Verfasst von Anup D. Pant und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim/Purpose: Previous studies have shown that the trabecular meshwork (TM) is mechanically stiffer in glaucomatous eyes as compared to normal eyes. It is believed that elevated TM stiffness increases resistance to the aqueous humor outflow, producing increased intraocular pressure (IOP).It would be advantageous to measure TM mechanical properties in vivo, as these properties are believed to play an important role in the pathophysiology of glaucoma and could be useful for identifying potential risk factors. The purpose of this study was to develop a method to estimate in-vivo TM mechanical properties using clinically available exams and computer simulations.

Design

Inverse finite element simulationMethods: A finite element model of the TM was constructed from optical coherence tomography (OCT) images of a healthy volunteer before and during IOP elevation. An axisymmetric model of the TM was then constructed. Images of the TM at a baseline IOP level of 11, and elevated level of 23 mmHg were treated as the undeformed and deformed configurations, respectively. An inverse modeling technique was subsequently used to estimate the TM shear modulus (G). An optimization technique was used to find the shear modulus that minimized the difference between Schlemm’s canal area in the in-vivo images and simulations.

Results

Upon completion of inverse finite element modeling, the simulated area of the Schlemm’s canal changed from 8,889 μm2 to 2,088 μm2, similar to the experimentally measured areal change of the canal (from 8,889 μm2 to 2,100 μm2). The calculated value of shear modulus was found to be 1.93 kPa, (implying an approximate Young’s modulus of 5.75 kPa), which is consistent with previous ex-vivo measurements.

Conclusion

The combined imaging and computational simulation technique provides a unique approach to calculate the mechanical properties of the TM in vivo without any surgical intervention. Quantification of such mechanical properties will help us examine the mechanistic role of TM biomechanics in the regulation of IOP in healthy and glaucomatous eyes.

Zitieren

APA

Pant, A. D., Kagemann, L., Schuman, J. S., Sigal, I. A., & Amini, R. (2017). An imaged-based inverse finite element method to determine in-vivo mechanical properties of the human trabecular meshwork. Modeling and Artificial Intelligence in Ophthalmology. https://doi.org/10.35119/maio.v1i3.48

Vancouver

Pant AD, Kagemann L, Schuman JS, Sigal IA, Amini R. An imaged-based inverse finite element method to determine in-vivo mechanical properties of the human trabecular meshwork. Modeling and Artificial Intelligence in Ophthalmology. 2017. doi:10.35119/maio.v1i3.48

BibTeX
@article{Pant2017,
  author = {Pant, Anup D. and Kagemann, Larry and Schuman, Joel S. and Sigal, Ian A. and Amini, Rouzbeh},
  title = {An imaged-based inverse finite element method to determine in-vivo mechanical properties of the human trabecular meshwork},
  journal = {Modeling and Artificial Intelligence in Ophthalmology},
  year = {2017},
  doi = {10.35119/maio.v1i3.48}
}
Kostenlos starten →