EUVIMEDEUVIMED entdecken
Crossref

Production of LLDPE and Sisal Composites via 3D Printing

Mariana Souza, Vinícius Oliveira, Lucas Horiuchi, Ana Paula Gonçalves, Paulo Romano Correia, Rodrigo Polkowski

JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH · 22.03.2026 · 9 (2) · 78-82

DOI: 10.34178/jbth.v9i2.572 ↗

Kurz gefasst

Fachartikel in der Zeitschrift JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH, online erschienen am 22.03.2026. Verfasst von Mariana Souza und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D printing is a processing technique that presents an interesting possibility for obtaining various materials, with advantages such as lower cost and design adaptation. Various materials are used for printing, including polymers. However, some difficulties can be faced due to the characteristics of the processed materials, such as their mechanical propertie (tensile strength and strain at maximum load). In this context, composite materials formed by linear low-density polyethylene (LLDPE) and sisal fibers in natura and chemically treated with sodium hydroxide solutions were obtained via extrusion (initially on a twin-screw printer to obtain the masterbatch, a single-screw printer to manufacture the filaments and a 3D printer to obtain the test specimens) with the aim of developing new materials and contributing to aspects related to LLDPE processing in the context of additive manufacturing. The specimens were mechanically evaluated through tensile testing, revealing that the control formulation exhibited greater tension at maximum force than the composites, as well as greater strain at maximum load. Comparing the materials with fiber addition without treatment and with treatment with sodium hydroxide at different content, it was observed that the treatment did not lead to significant differences in the evaluated mechanical properties. Thus, although the processing was successful, resulting in intact specimens, fiber treatments under the evaluated conditions were not sufficient to obtain improved mechanical properties.

Zitieren

APA

Souza, M., Oliveira, V., Horiuchi, L., Gonçalves, A. P., Correia, P. R., & Polkowski, R. (2026). Production of LLDPE and Sisal Composites via 3D Printing. JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH, 9(2), 78-82. https://doi.org/10.34178/jbth.v9i2.572

Vancouver

Souza M, Oliveira V, Horiuchi L, Gonçalves AP, Correia PR, Polkowski R. Production of LLDPE and Sisal Composites via 3D Printing. JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH. 2026;9(2):78-82. doi:10.34178/jbth.v9i2.572

BibTeX
@article{Souza2026,
  author = {Souza, Mariana and Oliveira, Vinícius and Horiuchi, Lucas and Gonçalves, Ana Paula and Correia, Paulo Romano and Polkowski, Rodrigo},
  title = {Production of LLDPE and Sisal Composites via 3D Printing},
  journal = {JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH},
  year = {2026},
  volume = {9},
  number = {2},
  pages = {78--82},
  doi = {10.34178/jbth.v9i2.572}
}
Kostenlos starten →