EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of SiC–Aluminum Composites via Binder Jetting 3D Printing and Infiltration: A Feasibility Study

Fahim Khan, Jackson Sanders, Md Shakil Arman, Mostafa Meraj Pasha, Stephen Kachur, Zhijian Pei

Journal of Composites Science · 27.02.2025 · 9 (3) · 111

DOI: 10.3390/jcs9030111 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 27.02.2025. Verfasst von Fahim Khan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this study is to demonstrate the feasibility of producing SiC–aluminum composites by the binder jetting 3D printing of SiC preforms and spontaneous infiltration by aluminum. SiC preforms fabricated using binder jetting 3D printing were subjected to several post-processing steps (including curing, depowdering, debinding, and sintering). Sintering was conducted at 1700 °C, and aluminum infiltrating was conducted at 1000 °C, with both carried out in a controlled nitrogen environment under a pressure of 25 psi. The bulk density of the sintered SiC preforms was increased by 14% after infiltration. X-ray diffraction and energy-dispersive X-ray spectroscopy confirmed the presence of aluminum in the SiC matrix. This paper is the first to report fabricating SiC–aluminum composites by binder jetting and infiltrating, providing a new approach to producing these composites with potential applications in the aerospace and automotive industries.

Zitieren

APA

Khan, F., Sanders, J., Arman, M. S., Pasha, M. M., Kachur, S., & Pei, Z. (2025). Fabrication of SiC–Aluminum Composites via Binder Jetting 3D Printing and Infiltration: A Feasibility Study. Journal of Composites Science, 9(3), 111. https://doi.org/10.3390/jcs9030111

Vancouver

Khan F, Sanders J, Arman MS, Pasha MM, Kachur S, Pei Z. Fabrication of SiC–Aluminum Composites via Binder Jetting 3D Printing and Infiltration: A Feasibility Study. Journal of Composites Science. 2025;9(3):111. doi:10.3390/jcs9030111

BibTeX
@article{Khan2025,
  author = {Khan, Fahim and Sanders, Jackson and Arman, Md Shakil and Pasha, Mostafa Meraj and Kachur, Stephen and Pei, Zhijian},
  title = {Fabrication of SiC–Aluminum Composites via Binder Jetting 3D Printing and Infiltration: A Feasibility Study},
  journal = {Journal of Composites Science},
  year = {2025},
  volume = {9},
  number = {3},
  pages = {111},
  doi = {10.3390/jcs9030111}
}
Kostenlos starten →