EUVIMEDOpdag EUVIMED
Crossref

Ultrafast Machining through Heating Laser-Excited Electrons

Guoqi Ren, Huijie Sun, Takumi Koike, Kota Takabayashi, Keiichi Nakagawa, Naohiko Sugita, Yusuke Ito

Ultrafast Science · 2025-01 · 5

DOI: 10.34133/ultrafastscience.0109 ↗

At a glance

Journal article in Ultrafast Science, published online on 2025-08-15. Written by Guoqi Ren and 6 co-authors. Cited 9 times so far (Crossref); 56 references. Funded by: Precursory Research for Embryonic Science and Technology, Japan Society for the Promotion of Science, AGC.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Although the precision ablation of transparent hard and brittle materials using ultrashort pulse lasers has been widely investigated, the speed of material removal remains low. In this study, we achieved ultrafast and precise material removal by creating a long-lifetime plasma filament inside the material and sufficiently heating it. A crack-free microhole with a depth of approximately 60 μm and a diameter of approximately 4 μm was generated within 2 μs. The machining speed was 4.3 × 10 4 times faster than conventional femtosecond laser processing. The dynamics of the plasma filament induced by an ultrashort pulse laser were investigated using the pump-probe method, indicating a slow decay of excited electrons owing to their high density. Through experiments and simulations, we revealed that a microsecond laser pulse can more effectively heat the plasma filament for material removal because of higher energy absorption. Moreover, the timing between filament generation and laser heating plays a critical role in machining due to the relaxation of excited electrons. This work provides an attractive route for advanced precision fabrication in industrial applications, as well as for facilitating the understanding of laser–matter interactions.

Funding

  • Precursory Research for Embryonic Science and Technology
  • Japan Society for the Promotion of Science
  • AGC

Cite

APA

Ren, G., Sun, H., Koike, T., Takabayashi, K., Nakagawa, K., Sugita, N., & Ito, Y. (2025). Ultrafast Machining through Heating Laser-Excited Electrons. Ultrafast Science, 5. https://doi.org/10.34133/ultrafastscience.0109

Vancouver

Ren G, Sun H, Koike T, Takabayashi K, Nakagawa K, Sugita N, et al. Ultrafast Machining through Heating Laser-Excited Electrons. Ultrafast Science. 2025;5. doi:10.34133/ultrafastscience.0109

BibTeX
@article{Ren2025,
  author = {Ren, Guoqi and Sun, Huijie and Koike, Takumi and Takabayashi, Kota and Nakagawa, Keiichi and Sugita, Naohiko and Ito, Yusuke},
  title = {Ultrafast Machining through Heating Laser-Excited Electrons},
  journal = {Ultrafast Science},
  year = {2025},
  volume = {5},
  doi = {10.34133/ultrafastscience.0109}
}
Start for free →