Ultrafast Machining through Heating Laser-Excited Electrons
Ultrafast Science · 2025-01 · 5
DOI: 10.34133/ultrafastscience.0109 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ultrafast Science, online erschienen am 15.08.2025. Verfasst von Guoqi Ren und 6 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: Precursory Research for Embryonic Science and Technology, Japan Society for the Promotion of Science, AGC.
Abstract (Originalsprache)
Although the precision ablation of transparent hard and brittle materials using ultrashort pulse lasers has been widely investigated, the speed of material removal remains low. In this study, we achieved ultrafast and precise material removal by creating a long-lifetime plasma filament inside the material and sufficiently heating it. A crack-free microhole with a depth of approximately 60 μm and a diameter of approximately 4 μm was generated within 2 μs. The machining speed was 4.3 × 10 4 times faster than conventional femtosecond laser processing. The dynamics of the plasma filament induced by an ultrashort pulse laser were investigated using the pump-probe method, indicating a slow decay of excited electrons owing to their high density. Through experiments and simulations, we revealed that a microsecond laser pulse can more effectively heat the plasma filament for material removal because of higher energy absorption. Moreover, the timing between filament generation and laser heating plays a critical role in machining due to the relaxation of excited electrons. This work provides an attractive route for advanced precision fabrication in industrial applications, as well as for facilitating the understanding of laser–matter interactions.
Förderung
- Precursory Research for Embryonic Science and Technology
- Japan Society for the Promotion of Science
- AGC
Zitieren
APA
Ren, G., Sun, H., Koike, T., Takabayashi, K., Nakagawa, K., Sugita, N., & Ito, Y. (2025). Ultrafast Machining through Heating Laser-Excited Electrons. Ultrafast Science, 5. https://doi.org/10.34133/ultrafastscience.0109
Vancouver
Ren G, Sun H, Koike T, Takabayashi K, Nakagawa K, Sugita N, et al. Ultrafast Machining through Heating Laser-Excited Electrons. Ultrafast Science. 2025;5. doi:10.34133/ultrafastscience.0109
BibTeX
@article{Ren2025,
author = {Ren, Guoqi and Sun, Huijie and Koike, Takumi and Takabayashi, Kota and Nakagawa, Keiichi and Sugita, Naohiko and Ito, Yusuke},
title = {Ultrafast Machining through Heating Laser-Excited Electrons},
journal = {Ultrafast Science},
year = {2025},
volume = {5},
doi = {10.34133/ultrafastscience.0109}
}
EUVIMED