EUVIMEDEUVIMED entdecken
Crossref

Experimental analysis of wheel and bogie frame transfer functions for on-board measurements of rail roughness

Kresimir BURNAC, Ivo HALADIN

INTER-NOISE and NOISE-CON Congress and Conference Proceedings · 04.10.2024 · 270 (5) · 6968-6976

DOI: 10.3397/in_2024_3894 ↗

Kurz gefasst

Fachartikel in der Zeitschrift INTER-NOISE and NOISE-CON Congress and Conference Proceedings, erschienen am 04.10.2024. Verfasst von Kresimir BURNAC und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Acceleration measurements on in-service rail vehicles give many valuable insights into track condition. These measurements are favourable in terms of measurement frequency, no need for additional track possession for measurements, operator safety, etc. The collected acceleration data however needs to be further processed to extract more detailed information on rail surface defects. To derive rail roughness from bogie frame acceleration, a complex signal processing approach is required, as well as determining the dynamic parameters of the track, vehicle, and operational conditions. In this paper, a method to evaluate the influence of resilient wheel and bogie frame on the acceleration data received from bogie frame-mounted accelerometers is described. The method is based on a standstill measurement of frequency response functions on wheel and bogie frame positions using an impact hammer and accelerometers. Following the preliminary results of bogie acceleration measurements, in-situ wheel receptance measurements were carried out on the same tramway vehicle in a standstill position, to determine the transfer function between the wheel-rail contact point and the position of the accelerometer mounted on the wheel frame. After the experimental study, a discussion of their potential application in the method for deriving rail roughness from vibration data is presented.

Zitieren

APA

BURNAC, K., & HALADIN, I. (2024). Experimental analysis of wheel and bogie frame transfer functions for on-board measurements of rail roughness. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, 270(5), 6968-6976. https://doi.org/10.3397/in_2024_3894

Vancouver

BURNAC K, HALADIN I. Experimental analysis of wheel and bogie frame transfer functions for on-board measurements of rail roughness. INTER-NOISE and NOISE-CON Congress and Conference Proceedings. 2024;270(5):6968-6976. doi:10.3397/in_2024_3894

BibTeX
@article{BURNAC2024,
  author = {BURNAC, Kresimir and HALADIN, Ivo},
  title = {Experimental analysis of wheel and bogie frame transfer functions for on-board measurements of rail roughness},
  journal = {INTER-NOISE and NOISE-CON Congress and Conference Proceedings},
  year = {2024},
  volume = {270},
  number = {5},
  pages = {6968--6976},
  doi = {10.3397/in_2024_3894}
}
Kostenlos starten →