EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Rail Corrugation and Roughness Using In-Service Tramway Bogie Frame Vibrations: Addressing Challenges and Perspectives

Krešimir Burnać, Ivo Haladin, Katarina Vranešić

Infrastructures · 12.08.2025 · 10 (8) · 209

DOI: 10.3390/infrastructures10080209 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Infrastructures, online erschienen am 12.08.2025. Verfasst von Krešimir Burnać und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EU Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rail corrugation and roughness represent typical irregularities on railway and tramway tracks, which cause increased dynamic forces, high-frequency vibrations, reduced riding comfort, shorter track lifespan, higher maintenance costs, and increased noise levels. Roughness and corrugation can be measured by evaluating the unevenness of the rail longitudinal running surface, which can be conducted using handheld devices or trolleys (directly on the track). Alternatively, vehicle or track-based indirect methods offer practical solutions for determining the condition of the rail running surface. This paper presents a methodology for rail corrugation and roughness evaluation, using bogie frame vibration data from an instrumented in-service tramway vehicle operating on Zagreb’s tramway network. Furthermore, it investigates the effects of various factors on the evaluation method, including wheel roughness, lateral positioning, signal processing methods, horizontal geometry, wheel–rail contact force, and tramway vehicle vibroacoustic characteristics. It was concluded that a simplified methodology that did not include transfer functions or wheel roughness measurements yielded relatively good results for evaluating rail corrugation and roughness across several wavelength bands. To improve the presented methodology, future research should assess the vehicle’s vibroacoustic characteristics with experimental hammer impact tests, measure the influence of wheel roughness on wheel–rail contact and bogie vibrations, and refine the measurement campaign by increasing test runs, limiting speed variation, and conducting controlled tests.

Förderung

  • EU Commission

Zitieren

APA

Burnać, K., Haladin, I., & Vranešić, K. (2025). Evaluation of Rail Corrugation and Roughness Using In-Service Tramway Bogie Frame Vibrations: Addressing Challenges and Perspectives. Infrastructures, 10(8), 209. https://doi.org/10.3390/infrastructures10080209

Vancouver

Burnać K, Haladin I, Vranešić K. Evaluation of Rail Corrugation and Roughness Using In-Service Tramway Bogie Frame Vibrations: Addressing Challenges and Perspectives. Infrastructures. 2025;10(8):209. doi:10.3390/infrastructures10080209

BibTeX
@article{Burna2025,
  author = {Burnać, Krešimir and Haladin, Ivo and Vranešić, Katarina},
  title = {Evaluation of Rail Corrugation and Roughness Using In-Service Tramway Bogie Frame Vibrations: Addressing Challenges and Perspectives},
  journal = {Infrastructures},
  year = {2025},
  volume = {10},
  number = {8},
  pages = {209},
  doi = {10.3390/infrastructures10080209}
}
Kostenlos starten →