EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

An Inverse Method for Wind Turbine Blade Design with Given Distributions of Load Coefficients

Guodan Dong, Jianhua Qin, Zhaobin Li, Xiaolei Yang

Wind · 2022-03-10 · 2 (1) · 175-191

DOI: 10.3390/wind2010010 ↗

At a glance

Journal article in Wind, published online on 2022-03-10. Written by Guodan Dong and 3 co-authors. Cited 7 times so far (Crossref); 39 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China, NSFC Basic Science Center Program for “Multiscale Problems in Nonlinear Mechanics”.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

It is shown in the literature that wind turbine designs with different load distributions have different wake features. To systematically study how different load distributions affect turbine wakes, a method for designing variants of blades with different radial load distributions, but with approximately the same power (CP) or thrust coefficient (CT), is needed. In this work, an inverse design method based on the blade element momentum method and the multi-dimensional Newton’s method, with the normal and tangential force coefficients as the design objective and iterations for satisfying the CP or CT constraint, is developed. The proposed method is validated using the two-bladed small-scale NREL phase VI S809 wind turbine blade design and the three-bladed utility-scale NREL 5 MW wind turbine blade design. Four variants of the NREL 5 MW wind turbine, i.e., the Root-CP, Tip-CP, Root-CT, and Tip-CT designs, which represent the variants of the original design (NREL-Ori) with a higher load near the blade root and tip regions with approximately the same power coefficient (CP) or thrust coefficient (CT) as that of the NREL-Ori design, respectively, are then designed using the proposed method. At last, the flapwise blade bending moment and the power coefficients from different variants of the NREL 5 MW turbine are compared for different tip speed ratios, showing that the “Root” designs are featured by a wider chord near the root, lower blade bending moment, and higher power coefficients for tip-speed ratios greater than nine.

Funding

  • National Natural Science Foundation of China
  • NSFC Basic Science Center Program for “Multiscale Problems in Nonlinear Mechanics”

Cite

APA

Dong, G., Qin, J., Li, Z., & Yang, X. (2022). An Inverse Method for Wind Turbine Blade Design with Given Distributions of Load Coefficients. Wind, 2(1), 175-191. https://doi.org/10.3390/wind2010010

Vancouver

Dong G, Qin J, Li Z, Yang X. An Inverse Method for Wind Turbine Blade Design with Given Distributions of Load Coefficients. Wind. 2022;2(1):175-191. doi:10.3390/wind2010010

BibTeX
@article{Dong2022,
  author = {Dong, Guodan and Qin, Jianhua and Li, Zhaobin and Yang, Xiaolei},
  title = {An Inverse Method for Wind Turbine Blade Design with Given Distributions of Load Coefficients},
  journal = {Wind},
  year = {2022},
  volume = {2},
  number = {1},
  pages = {175--191},
  doi = {10.3390/wind2010010}
}
Start for free →