EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design, Analysis, and Comparison of Electric Vehicle Drive Motor Rotors Using Injection-Molded Carbon-Fiber-Reinforced Plastics

Huai Cong Liu, Jang Soo Park, Il Hwan An

World Electric Vehicle Journal · 25.06.2024 · 15 (7) · 283

DOI: 10.3390/wevj15070283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift World Electric Vehicle Journal, online erschienen am 25.06.2024. Verfasst von Huai Cong Liu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry & Energy (MOTIE, Republic of Korea).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to their excellent mechanical strength, corrosion resistance, and ease of processing, carbon fiber and carbon-fiber-reinforced plastics are finding wide application in diverse fields, including aerospace, industry, and automobiles. This research explores the feasibility of integrating carbon fiber solutions into the rotors of 85-kilowatt electric vehicle interior permanent magnet synchronous motors. Two novel configurations are proposed: a carbon fiber wire-wound rotor and a carbon fiber injection-molded rotor. A finite element analysis compares the performance of these models against a basic designed rotor, considering factors like no-load back electromotive force, no-load voltage harmonics, cogging torque, load torque, torque ripple, efficiency, and manufacturing cost. Additionally, a comprehensive analysis of system efficiency and energy loss based on hypothetical electric vehicle parameters is presented. Finally, mechanical strength simulations assess the feasibility of the proposed carbon fiber composite rotor designs.

Förderung

  • Ministry of Trade, Industry & Energy (MOTIE, Republic of Korea)

Zitieren

APA

Liu, H. C., Park, J. S., & An, I. H. (2024). Design, Analysis, and Comparison of Electric Vehicle Drive Motor Rotors Using Injection-Molded Carbon-Fiber-Reinforced Plastics. World Electric Vehicle Journal, 15(7), 283. https://doi.org/10.3390/wevj15070283

Vancouver

Liu HC, Park JS, An IH. Design, Analysis, and Comparison of Electric Vehicle Drive Motor Rotors Using Injection-Molded Carbon-Fiber-Reinforced Plastics. World Electric Vehicle Journal. 2024;15(7):283. doi:10.3390/wevj15070283

BibTeX
@article{Liu2024,
  author = {Liu, Huai Cong and Park, Jang Soo and An, Il Hwan},
  title = {Design, Analysis, and Comparison of Electric Vehicle Drive Motor Rotors Using Injection-Molded Carbon-Fiber-Reinforced Plastics},
  journal = {World Electric Vehicle Journal},
  year = {2024},
  volume = {15},
  number = {7},
  pages = {283},
  doi = {10.3390/wevj15070283}
}
Kostenlos starten →