EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Torsional Characteristics of Injection-Molded Hinges from Plastics and Glass Fiber-Reinforced Plastics

Tran Minh The Uyen, Van-Thuc Nguyen, Xuan-Tien Vo iD, Pham Son Minh iD, Hai Nguyen Le Dang

Polymers · 03.10.2025 · 17 (19) · 2682

DOI: 10.3390/polym17192682 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 03.10.2025. Verfasst von Tran Minh The Uyen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Ho Chi Minh City University of Technology and Education, Ho Chi Minh City 71307, Vietnam. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HCMC University of Technology and Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the torsion characteristics of injection-molded flexural hinges manufactured from common polymers and plastic-based composites. The compliant mechanism provides a nearly constant torque over a specific rotational period. The flexural hinges are created via the injection molding technique, which has the advantage of mass production and low price. The injection plastics are pure polypropylene (PP), acrylonitrile butadiene styrene (ABS), and polyamide 6 (PA6), and the injection composites are PA6 combined with glass fibers. The torsional moment of the ABS flexural hinge ranges from −0.2 to 0.94 N∙m. The torsional moment of the PP polymer typically ranges from −0.6 to 0.8 N∙m. The torsional moment of the PA6 polymer ranges from −0.2 to 1.0 N∙m. Interestingly, the torsional moment diagram for this polymer is comparable to that of ABS, with a stable pattern in both positive and negative ranges. Furthermore, in other words, the PP flexural range is greater than the ABS range. Both ABS and PA6 flexural hinges have a higher level of stability compared to the PP one due to the higher elastic modulus and higher strength of these polymers than the PP polymer. The PP flexural hinge has the lowest negative torsional moment (−0.6 N∙m) compared to ABS and PA hinges. PA6 flexural hinges also have the most stable torsional moment compared to pure polymer varieties. Adding 5% to 10% fiberglass (FG) significantly improves the torsional moment of composite flexural hinges. More flexural hinges from different polymer types should be investigated. Further research should conduct some statistical analysis to clarify the variations between the torques for the various materials. The findings improve our understanding of plastic flexure hinges and expand their applicability.

Schlagwörter

Stichwörter der Autor:innen

ABSglass fiberspure polymertorsional moment

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Ho Chi Minh City University of Technology and Education, Ho Chi Minh City 71307, Vietnam.

ORCID-Profile: Xuan-Tien Vo, Pham Son Minh

Förderung

  • HCMC University of Technology and Education

Zitieren

APA

Uyen, T. M. T., Nguyen, V. T., Vo, X. T., Minh, P. S., & Dang, H. N. L. (2025). Torsional Characteristics of Injection-Molded Hinges from Plastics and Glass Fiber-Reinforced Plastics. Polymers, 17(19), 2682. https://doi.org/10.3390/polym17192682

Vancouver

Uyen TMT, Nguyen VT, Vo XT, Minh PS, Dang HNL. Torsional Characteristics of Injection-Molded Hinges from Plastics and Glass Fiber-Reinforced Plastics. Polymers. 2025;17(19):2682. doi:10.3390/polym17192682

BibTeX
@article{Uyen2025,
  author = {Uyen, Tran Minh The and Nguyen, Van-Thuc and Vo, Xuan-Tien and Minh, Pham Son and Dang, Hai Nguyen Le},
  title = {Torsional Characteristics of Injection-Molded Hinges from Plastics and Glass Fiber-Reinforced Plastics},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {19},
  pages = {2682},
  doi = {10.3390/polym17192682}
}
Kostenlos starten →