EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Temperature Tensile Behavior of Wrought and SLM-Fabricated Inconel 718: Effects of Build Orientation and Finite Element Modeling

Miruna Ciolca, Constantin Stochioiu, Mihai Costea, Alexandru Paraschiv, Florin Baciu, Daniel Vlăsceanu

Technologies · 05.08.2026 · 14 (8) · 492

DOI: 10.3390/technologies14080492 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technologies, online erschienen am 05.08.2026. Verfasst von Miruna Ciolca und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Academy of Romanian Scientists, Ministry of Research, Innovation and Digitalization, CCCDI-UEFISCDI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing enables the production of geometrically complex nickel-based superalloy components, but the high-temperature tensile response of selective laser-melted Inconel 718 remains strongly dependent on manufacturing route and build orientation. In this study, the tensile behavior of Inconel 718 specimens machined from wrought bar stock and fabricated by selective laser melting in horizontal and vertical build orientations was investigated at 23 °C, 450 °C, 550 °C and 750 °C. The experimental values were used in a finite element simulation to create a model that can accurately predict the mechanical behavior of IN718. The results show that the X-oriented SLM specimens exhibit tensile properties comparable to those of the wrought material, whereas the Z-oriented specimens display reduced strength and increased scatter, highlighting the effect of build orientation on mechanical performance. The numerical simulations reproduced the experimental stress–strain response with good agreement within the elastic and plastic deformation regimes, demonstrating the suitability of the proposed modeling approach for high-temperature structural assessment of Inconel 718 components manufactured by conventional and additive technologies.

Förderung

  • Academy of Romanian Scientists
  • Ministry of Research, Innovation and Digitalization, CCCDI-UEFISCDI

Zitieren

APA

Ciolca, M., Stochioiu, C., Costea, M., Paraschiv, A., Baciu, F., & Vlăsceanu, D. (2026). High-Temperature Tensile Behavior of Wrought and SLM-Fabricated Inconel 718: Effects of Build Orientation and Finite Element Modeling. Technologies, 14(8), 492. https://doi.org/10.3390/technologies14080492

Vancouver

Ciolca M, Stochioiu C, Costea M, Paraschiv A, Baciu F, Vlăsceanu D. High-Temperature Tensile Behavior of Wrought and SLM-Fabricated Inconel 718: Effects of Build Orientation and Finite Element Modeling. Technologies. 2026;14(8):492. doi:10.3390/technologies14080492

BibTeX
@article{Ciolca2026,
  author = {Ciolca, Miruna and Stochioiu, Constantin and Costea, Mihai and Paraschiv, Alexandru and Baciu, Florin and Vlăsceanu, Daniel},
  title = {High-Temperature Tensile Behavior of Wrought and SLM-Fabricated Inconel 718: Effects of Build Orientation and Finite Element Modeling},
  journal = {Technologies},
  year = {2026},
  volume = {14},
  number = {8},
  pages = {492},
  doi = {10.3390/technologies14080492}
}
Kostenlos starten →