EUVIMEDEUVIMED entdecken
Crossref

Effect of Build Orientation on Tensile Properties and Fractography of Additive Manufactured Inconel 718 Alloy

Ajay Kumar Maurya, Amit Kumar, Swarnambuj Suman

ASEAN Journal on Science and Technology for Development · 01.01.2025 · 42 (1)

DOI: 10.61931/2224-9028.1613 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ASEAN Journal on Science and Technology for Development, online erschienen am 01.01.2025. Verfasst von Ajay Kumar Maurya und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The additive manufacturing (AM) technique “Direct Metal Laser Sintering (DMLS)” is used to create 3D objects directly from 3D design data. A lightweight and complexity-free part without any expensive tooling can be fabricated easily using this method, but it is still challenging to achieve the desired mechanical strength from AM parts, as the mechanical properties of AM-produced parts vary with orientation, scan strategy, and process parameters. Inconel 718 alloy is most commonly utilized in the aerospace and automotive industries, because of its high resistance to corrosion and excellent mechanical qualities. This work presents a study to investigate the orientation-based mechanical behaviour of the AM-produced Inconel 718 alloy. Samples were fabricated in three building directions: horizontal (0o), inclined (45o), and vertical (90o). Tensile tests and fractography were performed. It was observed that a 0o build produces almost 6.2% higher tensile strength and approximately 6.69% higher elongation than a 90o build sample. Also, all the samples observed ductile failure with an elongation of more than 35%.

Zitieren

APA

Maurya, A. K., Kumar, A., & Suman, S. (2025). Effect of Build Orientation on Tensile Properties and Fractography of Additive Manufactured Inconel 718 Alloy. ASEAN Journal on Science and Technology for Development, 42(1). https://doi.org/10.61931/2224-9028.1613

Vancouver

Maurya AK, Kumar A, Suman S. Effect of Build Orientation on Tensile Properties and Fractography of Additive Manufactured Inconel 718 Alloy. ASEAN Journal on Science and Technology for Development. 2025;42(1). doi:10.61931/2224-9028.1613

BibTeX
@article{Maurya2025,
  author = {Maurya, Ajay Kumar and Kumar, Amit and Suman, Swarnambuj},
  title = {Effect of Build Orientation on Tensile Properties and Fractography of Additive Manufactured Inconel 718 Alloy},
  journal = {ASEAN Journal on Science and Technology for Development},
  year = {2025},
  volume = {42},
  number = {1},
  doi = {10.61931/2224-9028.1613}
}
Kostenlos starten →