EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Analysis and Experimental Validation on the Temperature Characteristics of Permanent Magnet/Magnetorheological Fluid Variable-Stiffness Driven Joints

Jinjie Ji, Xiaojun Liu, Zuzhi Tian, Zheng Fu, Xiangfan Wu, Xing Zhang, Chaochao Niu

Symmetry · 2026-02-28 · 18 (3) · 430

DOI: 10.3390/sym18030430 ↗

At a glance

Journal article in Symmetry, published online on 2026-02-28. Written by Jinjie Ji and 6 co-authors. 28 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

This study investigates the temperature distribution characteristics, temperature rise behavior, and the thermal effects on the output torque in a Permanent Magnet/Magnetorheological Fluid (PM/MRF) variable-stiffness drive joint through a combined approach of simulation and experimentation. First, a thermal simulation model of the joint was established using COMSOL Multiphysics, and steady-state and transient temperature field analyses were conducted under slip powers ranging from 25 W to 100 W. The steady-state results show that, when the joint reaches thermal equilibrium under 100 W, its internal maximum temperature is 113 °C, which falls within the allowable operating temperature range of the MRF. Transient simulations indicate that, within 180 s, the temperature in the working area of the joint continuously rises, but the rate of temperature increase gradually slows down, with a maximum temperature rise of 18.35 °C observed in the transmission mode. Furthermore, an experimental test system was constructed to conduct temperature rise characteristic tests and torque temperature characteristic tests on the joint. The experimental results show that the maximum actual temperature rise measured within 180 s in transmission mode was 17.36 °C, slightly lower than the simulated prediction. Within the temperature variation range of 10 °C to 50 °C, the maximum reductions in driving torque and braking torque were 14.1% and 14.9%, respectively. The study demonstrates that, under short-term operating conditions, the effect of the internal temperature rise on the output torque is predictable and can be mitigated through closed-loop current compensation. These findings provide theoretical and experimental foundations for the thermal safety design and high-precision control of PM/MRF variable-stiffness joints.

Funding

  • National Natural Science Foundation of China

Cite

APA

Ji, J., Liu, X., Tian, Z., Fu, Z., Wu, X., Zhang, X., & Niu, C. (2026). Analysis and Experimental Validation on the Temperature Characteristics of Permanent Magnet/Magnetorheological Fluid Variable-Stiffness Driven Joints. Symmetry, 18(3), 430. https://doi.org/10.3390/sym18030430

Vancouver

Ji J, Liu X, Tian Z, Fu Z, Wu X, Zhang X, et al. Analysis and Experimental Validation on the Temperature Characteristics of Permanent Magnet/Magnetorheological Fluid Variable-Stiffness Driven Joints. Symmetry. 2026;18(3):430. doi:10.3390/sym18030430

BibTeX
@article{Ji2026,
  author = {Ji, Jinjie and Liu, Xiaojun and Tian, Zuzhi and Fu, Zheng and Wu, Xiangfan and Zhang, Xing and Niu, Chaochao},
  title = {Analysis and Experimental Validation on the Temperature Characteristics of Permanent Magnet/Magnetorheological Fluid Variable-Stiffness Driven Joints},
  journal = {Symmetry},
  year = {2026},
  volume = {18},
  number = {3},
  pages = {430},
  doi = {10.3390/sym18030430}
}
Start for free →