Analysis and Experimental Validation on the Temperature Characteristics of Permanent Magnet/Magnetorheological Fluid Variable-Stiffness Driven Joints
Symmetry · 28.02.2026 · 18 (3) · 430
DOI: 10.3390/sym18030430 ↗Kurz gefasst
Fachartikel in der Zeitschrift Symmetry, online erschienen am 28.02.2026. Verfasst von Jinjie Ji und 6 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
This study investigates the temperature distribution characteristics, temperature rise behavior, and the thermal effects on the output torque in a Permanent Magnet/Magnetorheological Fluid (PM/MRF) variable-stiffness drive joint through a combined approach of simulation and experimentation. First, a thermal simulation model of the joint was established using COMSOL Multiphysics, and steady-state and transient temperature field analyses were conducted under slip powers ranging from 25 W to 100 W. The steady-state results show that, when the joint reaches thermal equilibrium under 100 W, its internal maximum temperature is 113 °C, which falls within the allowable operating temperature range of the MRF. Transient simulations indicate that, within 180 s, the temperature in the working area of the joint continuously rises, but the rate of temperature increase gradually slows down, with a maximum temperature rise of 18.35 °C observed in the transmission mode. Furthermore, an experimental test system was constructed to conduct temperature rise characteristic tests and torque temperature characteristic tests on the joint. The experimental results show that the maximum actual temperature rise measured within 180 s in transmission mode was 17.36 °C, slightly lower than the simulated prediction. Within the temperature variation range of 10 °C to 50 °C, the maximum reductions in driving torque and braking torque were 14.1% and 14.9%, respectively. The study demonstrates that, under short-term operating conditions, the effect of the internal temperature rise on the output torque is predictable and can be mitigated through closed-loop current compensation. These findings provide theoretical and experimental foundations for the thermal safety design and high-precision control of PM/MRF variable-stiffness joints.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Ji, J., Liu, X., Tian, Z., Fu, Z., Wu, X., Zhang, X., & Niu, C. (2026). Analysis and Experimental Validation on the Temperature Characteristics of Permanent Magnet/Magnetorheological Fluid Variable-Stiffness Driven Joints. Symmetry, 18(3), 430. https://doi.org/10.3390/sym18030430
Vancouver
Ji J, Liu X, Tian Z, Fu Z, Wu X, Zhang X, et al. Analysis and Experimental Validation on the Temperature Characteristics of Permanent Magnet/Magnetorheological Fluid Variable-Stiffness Driven Joints. Symmetry. 2026;18(3):430. doi:10.3390/sym18030430
BibTeX
@article{Ji2026,
author = {Ji, Jinjie and Liu, Xiaojun and Tian, Zuzhi and Fu, Zheng and Wu, Xiangfan and Zhang, Xing and Niu, Chaochao},
title = {Analysis and Experimental Validation on the Temperature Characteristics of Permanent Magnet/Magnetorheological Fluid Variable-Stiffness Driven Joints},
journal = {Symmetry},
year = {2026},
volume = {18},
number = {3},
pages = {430},
doi = {10.3390/sym18030430}
}
EUVIMED