A Machine Vision-Based Measurement Method for the Concentricity of Automotive Brake Piston Components
Symmetry · 27.11.2024 · 16 (12) · 1584
DOI: 10.3390/sym16121584 ↗Kurz gefasst
Fachartikel in der Zeitschrift Symmetry, online erschienen am 27.11.2024. Verfasst von Weinan Ge und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Projects of Jilin Province’s Science and Technology Development Pla, Jilin Provincial Department of Education Science and Technology Research Projects.
Abstract (Originalsprache)
The concentricity error of automotive brake piston components critically affects the stability and reliability of the brake system. Traditional contact-based concentricity measurement methods are inefficient. In order to address the issue of low detection efficiency, this paper proposes a non-contact concentricity measurement method based on the combination of machine vision and image processing technology. In this approach, an industrial camera is employed to capture images of the measured workpiece’s end face from the top of the spring. The edge contours are extracted through the implementation of image preprocessing algorithms, which are then followed by the calculation of the outer circle center and the fitting of the inner circle center. Finally, the concentricity error is calculated based on the coordinates of the inner and outer circle centers. The experimental results demonstrate that, in comparison to a coordinate measuring machine (CMM), this method exhibits a maximum error of only 0.0393 mm and an average measurement time of 3.9 s. This technology markedly enhances the efficiency of measurement and fulfills the industry’s requirement for automated inspection. The experiments confirmed the feasibility and effectiveness of this method in practical engineering applications, providing reliable technical support for the online inspection of automotive brake piston components. Moreover, this methodology can be extended to assess concentricity in other complex stepped shaft parts.
Förderung
- Key Research and Development Projects of Jilin Province’s Science and Technology Development Pla
- Jilin Provincial Department of Education Science and Technology Research Projects
Zitieren
APA
Ge, W., Li, Q., Zhao, W., Xu, T., & Zhang, S. (2024). A Machine Vision-Based Measurement Method for the Concentricity of Automotive Brake Piston Components. Symmetry, 16(12), 1584. https://doi.org/10.3390/sym16121584
Vancouver
Ge W, Li Q, Zhao W, Xu T, Zhang S. A Machine Vision-Based Measurement Method for the Concentricity of Automotive Brake Piston Components. Symmetry. 2024;16(12):1584. doi:10.3390/sym16121584
BibTeX
@article{Ge2024,
author = {Ge, Weinan and Li, Qinghua and Zhao, Wanting and Xu, Tiantian and Zhang, Shihong},
title = {A Machine Vision-Based Measurement Method for the Concentricity of Automotive Brake Piston Components},
journal = {Symmetry},
year = {2024},
volume = {16},
number = {12},
pages = {1584},
doi = {10.3390/sym16121584}
}
EUVIMED