Online measurement method for dimensions of disk parts based on machine vision
PLOS ONE · 25.07.2024 · 19 (7) · e0307525
DOI: 10.1371/journal.pone.0307525 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS ONE, online erschienen am 25.07.2024. Verfasst von Jianwei Miao und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Changchun Guanghua University, Changchun, China. Hauptthemen laut MEDLINE: Image Processing, Computer-Assisted. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Changchun Guanghua University Research Fund Cultivation Project.
Abstract (Originalsprache)
Online measurement of disk part dimensions by the standard industrial camera features low cost, high efficiency and good universality, but the impact of projection distortion and end face chamfer on measurement is needed to overcome. Present work presents a measurement method to resolve above issues based on machine vision. To improve the measurement accuracy, lower end face of a disk part is determined as calibration plane and the upper end face is measurement plane. To reduce the impact of projection distortion and chamfer on measurement, the measurement points are reconstructed on the measurement plane by re-projection. Then, the inner and outer diameters of disk parts are measured by circle geometric fitting, and the thickness is calculated by the measurement plane position. The experimental results show that the method can online measure disk part dimensions just by a single image, and accuracy meets the requirements of universal grade disk parts.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- School of Mechanical Engineering, Changchun Guanghua University, Changchun, China.
- School of Mechanical and Aerospace Engineering, Jilin University, Changchun, China.
- Sinotest Equipment Co., Ltd., Changchun, China.
- Army Academy of Armored Forces, Changchun, China.
ORCID-Profile: Jianwei Miao, Yongqi Zhang
Förderung
- Changchun Guanghua University Research Fund Cultivation Project
Zitieren
APA
Miao, J., Tan, Q., Sun, B., Zhao, J., Liu, S., & Zhang, Y. (2024). Online measurement method for dimensions of disk parts based on machine vision. PLOS ONE, 19(7), e0307525. https://doi.org/10.1371/journal.pone.0307525
Vancouver
Miao J, Tan Q, Sun B, Zhao J, Liu S, Zhang Y. Online measurement method for dimensions of disk parts based on machine vision. PLOS ONE. 2024;19(7):e0307525. doi:10.1371/journal.pone.0307525
BibTeX
@article{Miao2024,
author = {Miao, Jianwei and Tan, Qingchang and Sun, Baorui and Zhao, Jinghe and Liu, Siyuan and Zhang, Yongqi},
title = {Online measurement method for dimensions of disk parts based on machine vision},
journal = {PLOS ONE},
year = {2024},
volume = {19},
number = {7},
pages = {e0307525},
doi = {10.1371/journal.pone.0307525}
}
EUVIMED