EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Long-Term Electrochemical Stability of Zn/Zr/Mg-Based Phosphate Conversion Layers on Ti6Al4V in Simulated Physiological Environments

Diana-Petronela Burduhos-Nergis, Nicoleta-Monica Lohan, Mihai Popa, Nicanor Cimpoesu, Costica Bejinariu

Surfaces · 10.10.2026 · 9 (4) · 90

DOI: 10.3390/surfaces9040090 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surfaces, online erschienen am 10.10.2026. Verfasst von Diana-Petronela Burduhos-Nergis und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Research, Innovation and Digitalization, CNCS-UEFISCDI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Ti6Al4V alloy is widely used for biomedical implants, but the long-term stability of its surface in physiological environments can be improved by applying phosphate conversion coatings. In this study, three multicomponent coatings—Zn-Zr-Mg, Mg-Zn-Zr, and Zr-Zn-Mg—deposited on Ti64 were investigated to examine the influence of exposure time, coating composition, and immersion medium on electrochemical behaviour. The samples were immersed for 30, 60 and 90 days in Ringer’s solution, DPBS and EBSS, and their electrochemical stability was assessed using electrochemical impedance spectroscopy and equivalent circuit modelling. The results showed a trend that depended on both the layer composition and the test environment, with no steady decrease in impedance over time. After 90 days, the coated specimens retained low-frequency impedance moduli on the order of 104–105 Ω·cm2, depending on coating composition and immersion medium. In Ringer’s solution, the highest 90-day response was obtained for Zr-Zn-Mg, with |Z| at 0.01 Hz of approximately 4 × 104 Ω·cm2, compared with approximately 3 × 104 Ω·cm2 for uncoated Ti64. In DPBS, Zn-Zr-Mg and Mg-Zn-Zr reached approximately 1·105 Ω·cm2, whereas in EBSS, Zr-Zn-Mg reached approximately 1.5 × 105 Ω·cm2, compared with approximately 5 × 104 Ω·cm2 for Ti64. These quantitative differences confirm that the long-term response depends strongly on both coating composition and electrolyte chemistry, with Zr-Zn-Mg showing the highest 90-day impedance in Ringer’s solution and EBSS, while Zn-Zr-Mg and Mg-Zn-Zr reached the highest values in DPBS.

Förderung

  • Ministry of Research, Innovation and Digitalization, CNCS-UEFISCDI

Zitieren

APA

Burduhos-Nergis, D., Lohan, N., Popa, M., Cimpoesu, N., & Bejinariu, C. (2026). Long-Term Electrochemical Stability of Zn/Zr/Mg-Based Phosphate Conversion Layers on Ti6Al4V in Simulated Physiological Environments. Surfaces, 9(4), 90. https://doi.org/10.3390/surfaces9040090

Vancouver

Burduhos-Nergis D, Lohan N, Popa M, Cimpoesu N, Bejinariu C. Long-Term Electrochemical Stability of Zn/Zr/Mg-Based Phosphate Conversion Layers on Ti6Al4V in Simulated Physiological Environments. Surfaces. 2026;9(4):90. doi:10.3390/surfaces9040090

BibTeX
@article{BurduhosNergis2026,
  author = {Burduhos-Nergis, Diana-Petronela and Lohan, Nicoleta-Monica and Popa, Mihai and Cimpoesu, Nicanor and Bejinariu, Costica},
  title = {Long-Term Electrochemical Stability of Zn/Zr/Mg-Based Phosphate Conversion Layers on Ti6Al4V in Simulated Physiological Environments},
  journal = {Surfaces},
  year = {2026},
  volume = {9},
  number = {4},
  pages = {90},
  doi = {10.3390/surfaces9040090}
}
Kostenlos starten →