Microstructure, Adhesion and Tribomechanical Performance of Zn–Mg–Ca- and Zn–Zr-Based Phosphate Conversion Coatings on Ti6Al4V Alloy
Materials · 23.09.2026 · 19 (19) · 4058
DOI: 10.3390/ma19194058 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 23.09.2026. Verfasst von Diana-Petronela Burduhos-Nergis und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Material Science and Engineering, Gheorghe Asachi Technical University of Iasi, 41, Prof. Dr. doc. D. Mangeron str., 700050 Iasi, Romania. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Unitatea Executiva Pentru Finantarea Invatamantului Superior a Cercetarii Dezvoltarii si Inovarii, Ministry of Research, Innovation and Digitalization.
Abstract (Originalsprache)
Ti6Al4V remains one of the most widely used metallic biomaterials for orthopedic and dental implants; however, the long-term performance of implantable devices is strongly influenced by the mechanical integrity and surface stability of the implant–tissue interface. In this study, novel phosphate conversion coatings based on Zn–Mg–Ca, Zn–Zr–Mg, and Zn–Zr–Ca systems were developed on Ti6Al4V substrates through a chemical conversion process and investigated from a tribomechanical perspective. The coatings were designed to incorporate biologically relevant elements capable of modifying crystal growth, coating compactness and interfacial characteristics. Surface morphology, coating architecture and elemental distribution were evaluated using scanning electron microscopy and energy-dispersive spectroscopy, while surface roughness was determined by profilometry. The mechanical response of the conversion-modified surfaces was assessed through instrumented microindentation and progressive-load scratch testing coupled with acoustic emission monitoring. Significant differences in coating morphology, thickness and compactness were observed as a function of phosphating chemistry. Dense and homogeneous coatings exhibited improved hardness, higher elastic recovery and enhanced resistance to plastic deformation, whereas heterogeneous structures containing large intergranular regions showed inferior mechanical performance. Scratch testing demonstrated that coating composition strongly influences damage initiation, interfacial stability and resistance to coating detachment. Among the investigated systems, Zn–Zr–Ca and selected Zn–Zr–Mg formulations provided the most favorable combination of compact microstructure, mechanical integrity and scratch resistance. The results establish clear relationships between phosphating chemistry, coating architecture and tribomechanical behavior, providing valuable insight for the design of conversion-treated Ti6Al4V surfaces intended for biomedical implant applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Material Science and Engineering, Gheorghe Asachi Technical University of Iasi, 41, Prof. Dr. doc. D. Mangeron str., 700050 Iasi, Romania.
- Academy of Romanian Scientists, Ilfov 3, 050044 Bucharest, Romania.
- Faculty of Mechanical Engineering, Gheorghe Asachi Technical University of Iasi, 61-63, Prof. Dr. doc. D. Mangeron str., 700050 Iasi, Romania.
ORCID-Profile: Diana-Petronela Burduhos-Nergis, Nicoleta-Monica Lohan, Gheorghe Badarau, Costica Bejinariu, Marcelin Benchea, Fabian-Cezar Lupu
Förderung
- Unitatea Executiva Pentru Finantarea Invatamantului Superior a Cercetarii Dezvoltarii si Inovarii
- Ministry of Research, Innovation and Digitalization
Zitieren
APA
Burduhos-Nergis, D. P., Lohan, N. M., Matcovschi, E., Badarau, G., Bejinariu, C., Benchea, M., Lupu, F. C., & Cimpoesu, N. (2026). Microstructure, Adhesion and Tribomechanical Performance of Zn–Mg–Ca- and Zn–Zr-Based Phosphate Conversion Coatings on Ti6Al4V Alloy. Materials, 19(19), 4058. https://doi.org/10.3390/ma19194058
Vancouver
Burduhos-Nergis DP, Lohan NM, Matcovschi E, Badarau G, Bejinariu C, Benchea M, et al. Microstructure, Adhesion and Tribomechanical Performance of Zn–Mg–Ca- and Zn–Zr-Based Phosphate Conversion Coatings on Ti6Al4V Alloy. Materials. 2026;19(19):4058. doi:10.3390/ma19194058
BibTeX
@article{BurduhosNergis2026,
author = {Burduhos-Nergis, Diana-Petronela and Lohan, Nicoleta-Monica and Matcovschi, Elena and Badarau, Gheorghe and Bejinariu, Costica and Benchea, Marcelin and Lupu, Fabian-Cezar and Cimpoesu, Nicanor},
title = {Microstructure, Adhesion and Tribomechanical Performance of Zn–Mg–Ca- and Zn–Zr-Based Phosphate Conversion Coatings on Ti6Al4V Alloy},
journal = {Materials},
year = {2026},
volume = {19},
number = {19},
pages = {4058},
doi = {10.3390/ma19194058}
}
EUVIMED