EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Two-Step Combined Ball Milling Strategy for FeCoCrNiCu High-Entropy Alloy Powders with Enhanced Compositional Homogeneity

Yunxiao Zhang, Wenxuan Li, Ke Liu, Zhendong Sha, Jun Ding

Surfaces · 15.03.2026 · 9 (1) · 28

DOI: 10.3390/surfaces9010028 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surfaces, online erschienen am 15.03.2026. Verfasst von Yunxiao Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work aims to develop a controlled ball milling strategy for preparing FeCoCrNiCu high-entropy alloy (HEA) powders with improved compositional homogeneity while maintaining limited oxygen uptake. Specifically, a novel two-step combined ball milling strategy integrating gradient ball-size configurations with a sequential milling procedure is proposed and systematically evaluated. Compared with conventional single-step milling, the mixed-ball and two-step configurations enhance mechanical alloying (MA) efficiency and promote the formation of more stable FCC and BCC dual-phase structures, as confirmed by X-ray diffraction (XRD) analysis. Compositional standard deviation derived from energy-dispersive X-ray spectroscopy (EDS) measurements indicates improved macroscopic uniformity, while oxygen/nitrogen/hydrogen (ONH) analysis verifies that oxygen incorporation remains limited within the tested processing window. Systematic comparison of jar filling degrees and sampling interruptions further reveals the coupled influence of collision energy distribution and exposure frequency on oxidation behavior. The results demonstrate that controlled energy distribution and minimized atmospheric disturbance are critical for balancing alloying efficiency and oxygen control in FeCoCrNiCu powders.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, Y., Li, W., Liu, K., Sha, Z., & Ding, J. (2026). Two-Step Combined Ball Milling Strategy for FeCoCrNiCu High-Entropy Alloy Powders with Enhanced Compositional Homogeneity. Surfaces, 9(1), 28. https://doi.org/10.3390/surfaces9010028

Vancouver

Zhang Y, Li W, Liu K, Sha Z, Ding J. Two-Step Combined Ball Milling Strategy for FeCoCrNiCu High-Entropy Alloy Powders with Enhanced Compositional Homogeneity. Surfaces. 2026;9(1):28. doi:10.3390/surfaces9010028

BibTeX
@article{Zhang2026,
  author = {Zhang, Yunxiao and Li, Wenxuan and Liu, Ke and Sha, Zhendong and Ding, Jun},
  title = {Two-Step Combined Ball Milling Strategy for FeCoCrNiCu High-Entropy Alloy Powders with Enhanced Compositional Homogeneity},
  journal = {Surfaces},
  year = {2026},
  volume = {9},
  number = {1},
  pages = {28},
  doi = {10.3390/surfaces9010028}
}
Kostenlos starten →