EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Properties of High-Entropy Fe30Co20Ni20Mn20Al10 Alloy Produced by High-Energy Ball Milling

Chérif Ben Ammar iD, Nawel Khitouni, Wael Ben Mbarek iD, Abdulelah H Alsulami, Joan-Josep Suñol iD, Mohamed Khitouni, Mahmoud Chemingui

Materials · 31.12.2023 · 17 (1) · 234

DOI: 10.3390/ma17010234 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.12.2023. Verfasst von Chérif Ben Ammar und 6 weiteren Autor:innen. Beteiligte Einrichtung: Laboratoire de Chimie Inorganique, UR 11-ES-73, Université de Sfax, B.P. 1171, Sfax 3018, Tunisia. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A high-entropy Fe30Co20Ni20Mn20Al10 (at%) alloy with a face-centered cubic (FCC) crystalline phase was produced through mechanical alloying. This study examined the development of its phases, microstructure, morphology, and magnetic characteristics. Scanning electron microscopy (SEM) was applied to assess the sample morphology in relation to milling times. The changes that the material underwent during milling were investigated using X-ray diffraction. The milling time affected the phase transformation. A single FCC solid solution (crystallite size = 12 nm) was found after 50 h of milling. Additionally, the magnetic characteristics were examined and shown to be associated with microstructural changes. The powder mixture exhibited behavior consistent with soft magnetics, with an Hc value of 8 Am−1 and an Ms value of 165 emu/g. The excellent soft magnetic characteristic may be related to the stability of the FCC phase, which was generated following a 30 h milling process. In addition, the low value of Ms may have originated from the presence of Al atoms in the solid solution and the development of large densities of interfaces and crystal defects.

Schlagwörter

Stichwörter der Autor:innen

HEA alloyX-ray diffractionmagnetic characteristicsmechanical alloyingmicrostructure

Autor:innen und Institutionen

  • Laboratoire de Chimie Inorganique, UR 11-ES-73, Université de Sfax, B.P. 1171, Sfax 3018, Tunisia.
  • Department of Physics, Campus Montilivi, University of Girona, 17071 Girona, Spain.
  • Chemistry Department, Faculty of Science and Arts in Baljurashi, Al-Baha University, Al-Baha 65527, Saudi Arabia.
  • Department of Chemistry, College of Science, Qassim University, Buraidah 51452, Saudi Arabia.

ORCID-Profile: Chérif Ben Ammar, Wael Ben Mbarek, Joan-Josep Suñol

Zitieren

APA

Ammar, C. B., Khitouni, N., Mbarek, W. B., Alsulami, A. H., Suñol, J. J., Khitouni, M., & Chemingui, M. (2023). Properties of High-Entropy Fe30Co20Ni20Mn20Al10 Alloy Produced by High-Energy Ball Milling. Materials, 17(1), 234. https://doi.org/10.3390/ma17010234

Vancouver

Ammar CB, Khitouni N, Mbarek WB, Alsulami AH, Suñol JJ, Khitouni M, et al. Properties of High-Entropy Fe30Co20Ni20Mn20Al10 Alloy Produced by High-Energy Ball Milling. Materials. 2023;17(1):234. doi:10.3390/ma17010234

BibTeX
@article{Ammar2023,
  author = {Ammar, Chérif Ben and Khitouni, Nawel and Mbarek, Wael Ben and Alsulami, Abdulelah H and Suñol, Joan-Josep and Khitouni, Mohamed and Chemingui, Mahmoud},
  title = {Properties of High-Entropy Fe30Co20Ni20Mn20Al10 Alloy Produced by High-Energy Ball Milling},
  journal = {Materials},
  year = {2023},
  volume = {17},
  number = {1},
  pages = {234},
  doi = {10.3390/ma17010234}
}
Kostenlos starten →