EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Sintering Atmosphere Control on the Surface Engineering of Catamold Steels Produced by MIM: A Review

Jorge Luis Braz Medeiros, Carlos Otávio Damas Martins, Luciano Volcanoglo Biehl

Surfaces · 29.12.2025 · 9 (1) · 7

DOI: 10.3390/surfaces9010007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surfaces, online erschienen am 29.12.2025. Verfasst von Jorge Luis Braz Medeiros und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordination for the Improvement of Higher Education Personnel-Brazil.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal Injection Molding (MIM) is an established, high-precision manufacturing route for small, geometrically complex metallic components, integrating polymer injection molding with powder metallurgy. State-of-the-art feedstock systems, such as Catamold (polyacetal-based), enable catalytic debinding performed in furnaces operating under ultra-high-purity nitric acid atmospheres (>99.999%). The subsequent thermal stages pre-sintering and sintering are carried out in continuous controlled-atmosphere furnaces or vacuum systems, typically employing inert (N2) or reducing (H2) atmospheres to meet the specific thermodynamic requirements of each alloy. However, incomplete decomposition or secondary volatilization of binder residues can lead to progressive hydrocarbon accumulation within the sinering chamber. These contaminants promote undesirable carburizing atmospheres, which, under austenitizing or intercritical conditions, increase carbon diffusion and generate uncontrolled surface carbon gradients. Such effects alter the microstructural evolution, hardness, wear behavior, and mechanical integrity of MIM steels. Conversely, inadequate dew point control may shift the atmosphere toward oxidizing regimes, resulting in surface decarburization and oxide formation effects that are particularly detrimental in stainless steels, tool steels, and martensitic alloys, where surface chemistry is critical for performance. This review synthesizes current knowledge on atmosphere-induced surface deviations in MIM steels, examining the underlying thermodynamic and kinetic mechanisms governing carbon transport, oxidation, and phase evolution. Strategies for atmosphere monitoring, contamination mitigation, and corrective thermal or thermochemical treatments are evaluated. Recommendations are provided to optimize surface substrate interactions and maximize the functional performance and reliability of MIM-processed steel components in demanding engineering applications.

Förderung

  • Coordination for the Improvement of Higher Education Personnel-Brazil

Zitieren

APA

Medeiros, J. L. B., Martins, C. O. D., & Biehl, L. V. (2025). Effect of Sintering Atmosphere Control on the Surface Engineering of Catamold Steels Produced by MIM: A Review. Surfaces, 9(1), 7. https://doi.org/10.3390/surfaces9010007

Vancouver

Medeiros JLB, Martins COD, Biehl LV. Effect of Sintering Atmosphere Control on the Surface Engineering of Catamold Steels Produced by MIM: A Review. Surfaces. 2025;9(1):7. doi:10.3390/surfaces9010007

BibTeX
@article{Medeiros2025,
  author = {Medeiros, Jorge Luis Braz and Martins, Carlos Otávio Damas and Biehl, Luciano Volcanoglo},
  title = {Effect of Sintering Atmosphere Control on the Surface Engineering of Catamold Steels Produced by MIM: A Review},
  journal = {Surfaces},
  year = {2025},
  volume = {9},
  number = {1},
  pages = {7},
  doi = {10.3390/surfaces9010007}
}
Kostenlos starten →