EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Sintering Temperature and Solution Treatment on Phase Changes and Mechanical Properties of High-Nitrogen Stainless Steel Prepared by MIM

Weipeng Zhang iD, Liejun Li, Chengcheng Huang, Tungwai Ngai, Ling Hu

Materials · 07.03.2023 · 16 (6) · 2135

DOI: 10.3390/ma16062135 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.03.2023. Verfasst von Weipeng Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Key Laboratory for Processing and Forming of Advanced Metallic Materials, South China University of Technology, Guangzhou 510640, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Innovation Leadership Team Project of Zengcheng district of Guangzhou city, Academician Workstation Project of Guangzhou city (Guangzhou Golden South Magnetic Material Co., Ltd., Guangzhou, China).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-nitrogen stainless steel (HNSS) has been widely concerned and studied owing to its excellent mechanical, corrosion resistance, and biocompatibility properties. A series of HNSS was prepared by metal injection molding (MIM) using gas atomized Fe–Cr–Mn–Mo–0.3 N duplex stainless steel powders. Both sintering and solution treatments were carried out in an N2 atmosphere. The effects of nitrogen distribution and phase transformation on the mechanical properties of MIM HNSS during sintering and solution were studied. The results show that as the sintering temperature increased, the sample density increased, but the total nitrogen content decreased. Nitrogen and Cr2N concentration gradients along the cross-section of as-sintered samples were formed after cooling. The high nitrogen content promotes the decomposition of γ: γsaturated translated to γ and Cr2N. Meanwhile, the low Mn content in austenite also decomposes γ: γ translated to α and Cr2N. After solution treatment, a single γ phase was obtained for samples sintered at 1200 to 1320 °C. For solution treatment samples sintered at 1320 and 1350 °C, their tensile strength was 988.76 and 1036.12 MPa; yield strength was 615.61 and 636.14 MPa, and elongation was 42.58 and 40.08%, respectively. These values vastly exceeded the published MIM HNSS values.

Schlagwörter

Stichwörter der Autor:innen

high-nitrogen stainless steelmechanical propertiesmetal injection moldingnitrogen concentration gradientphase transformation

Autor:innen und Institutionen

  • Guangdong Key Laboratory for Processing and Forming of Advanced Metallic Materials, South China University of Technology, Guangzhou 510640, China.

ORCID-Profile: Weipeng Zhang

Förderung

  • National Natural Science Foundation of China
  • Innovation Leadership Team Project of Zengcheng district of Guangzhou city
  • Academician Workstation Project of Guangzhou city (Guangzhou Golden South Magnetic Material Co., Ltd., Guangzhou, China)

Zitieren

APA

Zhang, W., Li, L., Huang, C., Ngai, T., & Hu, L. (2023). Effect of Sintering Temperature and Solution Treatment on Phase Changes and Mechanical Properties of High-Nitrogen Stainless Steel Prepared by MIM. Materials, 16(6), 2135. https://doi.org/10.3390/ma16062135

Vancouver

Zhang W, Li L, Huang C, Ngai T, Hu L. Effect of Sintering Temperature and Solution Treatment on Phase Changes and Mechanical Properties of High-Nitrogen Stainless Steel Prepared by MIM. Materials. 2023;16(6):2135. doi:10.3390/ma16062135

BibTeX
@article{Zhang2023,
  author = {Zhang, Weipeng and Li, Liejun and Huang, Chengcheng and Ngai, Tungwai and Hu, Ling},
  title = {Effect of Sintering Temperature and Solution Treatment on Phase Changes and Mechanical Properties of High-Nitrogen Stainless Steel Prepared by MIM},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {6},
  pages = {2135},
  doi = {10.3390/ma16062135}
}
Kostenlos starten →