Influence of Printing Orientation on the Mechanical Performance and Environmental Footprint of PLA/TPU Heterogeneous Composites
Sustainability · 10.04.2026 · 18 (8) · 3786
DOI: 10.3390/su18083786 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 10.04.2026. Verfasst von Wenxuan Wang und 6 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Natural Science Foundation of Hubei Province, Foundation of National Key Laboratory for Remanufacturing.
Abstract (Originalsprache)
This study examines how 3D-printing orientation affects the mechanical behavior and environmental impact of polymer materials and heterogeneous PLA/TPU composites. Tensile properties of PLA, TPU, and PLA/TPU heterogeneous samples were systematically compared in horizontal and vertical printing orientations. Results show that printing orientation governs mechanical performance: vertical printing generally reduces ductility and exhibits unstable post-peak behavior, with heterogeneous samples performing worse than their single-material counterparts. In contrast, horizontal printing enhances strength, ductility, and energy absorption due to continuous load transfer along the filament path, improved interlayer adhesion, and larger effective contact areas. Specifically, TPU demonstrates higher ductility and energy absorption in the horizontal orientation, while PLA achieves higher strength but lower ductility; both materials degrade substantially in the vertical orientation. For heterogeneous composites, vertical printing yields the poorest outcomes due to load transfer across multiple perpendicular interfaces and thermal shrinkage mismatch, which promote crack initiation and propagation. Horizontal printing delivers an optimal balance of strength and toughness via stronger interface bonding. Life cycle assessment (LCA) indicates that horizontal printing reduces environmental burdens by lowering energy consumption and waste, whereas vertical printing amplifies these impacts, particularly for TPU and composite systems. Based on these findings, we recommend employing horizontally printed PLA/TPU heterogeneous composites to achieve favorable load paths and interface integrity while prioritizing bio-based PLA to enhance sustainability.
Förderung
- National Key R&D Program of China
- Natural Science Foundation of Hubei Province
- Foundation of National Key Laboratory for Remanufacturing
- Major Project of Hubei Province Science and Technology
Zitieren
APA
Wang, W., Hu, Z., Zhou, R., Huang, Y., Wang, Y., Mu, B., & Chen, M. (2026). Influence of Printing Orientation on the Mechanical Performance and Environmental Footprint of PLA/TPU Heterogeneous Composites. Sustainability, 18(8), 3786. https://doi.org/10.3390/su18083786
Vancouver
Wang W, Hu Z, Zhou R, Huang Y, Wang Y, Mu B, et al. Influence of Printing Orientation on the Mechanical Performance and Environmental Footprint of PLA/TPU Heterogeneous Composites. Sustainability. 2026;18(8):3786. doi:10.3390/su18083786
BibTeX
@article{Wang2026,
author = {Wang, Wenxuan and Hu, Zhiheng and Zhou, Ruoyi and Huang, Yitao and Wang, Yilun and Mu, Bo and Chen, Mingzhang},
title = {Influence of Printing Orientation on the Mechanical Performance and Environmental Footprint of PLA/TPU Heterogeneous Composites},
journal = {Sustainability},
year = {2026},
volume = {18},
number = {8},
pages = {3786},
doi = {10.3390/su18083786}
}
EUVIMED