Air-Assisted Tribo-Electrostatic Separator for Recycling of Shredded Waste Plastics
Sustainability · 19.12.2024 · 16 (24) · 11142
DOI: 10.3390/su162411142 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 19.12.2024. Verfasst von Fethi Miloua und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: General Directorate of Algerian Scientific Research and Technological Development (DGRSDT), Alienor Transfer Agency, University of Poitiers.
Abstract (Originalsprache)
Waste minimization is a major way to achieve sustainable development. Electrostatic separation is already used in the recycling industry for processing certain mixtures of shredded plastics originating from waste electric and electronic equipment. Standard tribo-electrostatic separators use electric forces to deflect the trajectories of triboelectrically charged particles in the electric field generated between two vertical plate electrodes connected to high voltage supplies of opposite polarities. However, the efficiency of this device is often limited by the impacts between the particles and the electrodes, which diminish the recovery and the purity of the end product. An innovative electrostatic separator was specifically designed to mitigate this risk. The innovation lies in using two rotating co-axial vertical cylindrical electrodes and assisting the movement of the particles with downward-oriented air flow to reduce their impact on the electrodes and improve the quality of the recovered products. The aim of this study was to optimize the operation of the patented electrostatic separator by using experimental design methodology to obtain quadratic polynomial models of the recovery and the purity of the products as functions of the high voltage applied to the electrode system and of the air flow through the device. The experiments were conducted with a granular mixture composed of 88% polypropylene (PP) and 12% high-impact polystyrene (HIPS) particles, extracted from the recycling process of waste electrical and electronic equipment, and triboelectrically charged in a fluidized bed device. A voltage of 50 kV combined with an air flow rate of 1700 m3/min maximized the recovery and the purity of PP and HIPS products collected at the outlet of the separator. These results open promising prospects for expanding the use of tribo-electrostatic separation for efficient recycling of granular waste plastics.
Förderung
- General Directorate of Algerian Scientific Research and Technological Development (DGRSDT)
- Alienor Transfer Agency, University of Poitiers
Zitieren
APA
Miloua, F., Nemmich, S., Zeghloul, T., Miloudi, M., Medles, K., & Dascalescu, L. (2024). Air-Assisted Tribo-Electrostatic Separator for Recycling of Shredded Waste Plastics. Sustainability, 16(24), 11142. https://doi.org/10.3390/su162411142
Vancouver
Miloua F, Nemmich S, Zeghloul T, Miloudi M, Medles K, Dascalescu L. Air-Assisted Tribo-Electrostatic Separator for Recycling of Shredded Waste Plastics. Sustainability. 2024;16(24):11142. doi:10.3390/su162411142
BibTeX
@article{Miloua2024,
author = {Miloua, Fethi and Nemmich, Said and Zeghloul, Thami and Miloudi, Mohamed and Medles, Karim and Dascalescu, Lucian},
title = {Air-Assisted Tribo-Electrostatic Separator for Recycling of Shredded Waste Plastics},
journal = {Sustainability},
year = {2024},
volume = {16},
number = {24},
pages = {11142},
doi = {10.3390/su162411142}
}
EUVIMED