Phase Characterisation for Recycling of Shredded Waste Printed Circuit Boards
Recycling · 06.08.2025 · 10 (4) · 157
DOI: 10.3390/recycling10040157 ↗Kurz gefasst
Fachartikel in der Zeitschrift Recycling, online erschienen am 06.08.2025. Verfasst von Laurance Donnelly und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Alfred H Knight International Limited, Vidence Inc., Bruker Nano Analytics GmbH, Germany.
Abstract (Originalsprache)
In this study, we adopt a geometallurgical analytical approach common in mineral processing in the characterization of samples of shredded waste printed circuit board (PCB) E-waste, originating from Europe. Conventionally, bulk chemical analysis provides a value for E-waste; however, chemical analysis alone does not provide information on the textural variability, phase complexity, grain size, particle morphology, phase liberation and associations. To address this, we have integrated analysis using binocular microscopy, manual scanning electron microscopy, phase, textural and compositional analyses by automated (SEM-EDS), phase analysis based on (Automated Material Identification and Classification System (AMICS) software, and elemental analysis using micro-XRF. All methods used have strengths and limitations, but an integration of these analytical tools allows the detailed characterization of the texture and composition of the E-waste feeds, ahead of waste reprocessing. These data can then be used to aid the design of optimized processing circuits for the recovery of the key payable components, and assist in the commercial trading of e-scrap.
Förderung
- Alfred H Knight International Limited
- Vidence Inc.
- Bruker Nano Analytics GmbH, Germany
Zitieren
APA
Donnelly, L., Pirrie, D., Power, M., & Menzies, A. (2025). Phase Characterisation for Recycling of Shredded Waste Printed Circuit Boards. Recycling, 10(4), 157. https://doi.org/10.3390/recycling10040157
Vancouver
Donnelly L, Pirrie D, Power M, Menzies A. Phase Characterisation for Recycling of Shredded Waste Printed Circuit Boards. Recycling. 2025;10(4):157. doi:10.3390/recycling10040157
BibTeX
@article{Donnelly2025,
author = {Donnelly, Laurance and Pirrie, Duncan and Power, Matthew and Menzies, Andrew},
title = {Phase Characterisation for Recycling of Shredded Waste Printed Circuit Boards},
journal = {Recycling},
year = {2025},
volume = {10},
number = {4},
pages = {157},
doi = {10.3390/recycling10040157}
}
EUVIMED