EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploring the Potential of 3D Printing Technology for Sustainable Plastic Roads: A Preliminary Investigation

Mohamed Ezzat Al-Atroush, Jumana Almushcab, Duha Alhudaif, Yosra Meskinyar

Sustainability · 13.12.2023 · 15 (24) · 16777

DOI: 10.3390/su152416777 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 13.12.2023. Verfasst von Mohamed Ezzat Al-Atroush und 3 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Prince Sultan University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The urgency of climate change has highlighted the need for sustainable road construction materials, replacing the conventional asphalt, which significantly contributes to global warming and the urban heat island effect. With this in mind, the construction of the world’s first 30-m plastic road in Zwolle, Netherlands, in 2018, opened the door for novel plastic applications as paving materials. However, its application is currently still limited to sidewalks and light-load cycling lanes. The feasibility of utilizing 3D printing technology to provide the necessary structural design flexibility for the production of plastic pavement modules that can withstand heavy traffic and extreme weather conditions was examined in this preliminary study. The suitability of six plastic materials (PLA, PETG, ABS, TPU, Nylon, and polycarbonate) for 3D printing was evaluated. Polylactic acid (PLA), and polyethylene terephthalate glycol (PETG) were identified as the most suitable materials for this study. Three small-scale structural systems, namely hollow modular with plastic columns, hollow modular with solid plastic cones, and hollow modular with X-bracing, were designed and successfully printed using the adopted materials and a 3D printer. The developed systems were subsequently subjected to compression testing to assess their structural performance under heavy traffic loads and demonstrate the feasibility of the concept. The results showed that the PLA conic structural system was effective and exhibited the highest compression strength, while the PETG conic system exhibited ductile behavior with superior thermal stability. The study suggests that the hybrid system of PLA and PETG materials may improve the overall performance, combine flexibility and strength, and potentially improve the resistance to extreme weather and heavy traffic. These findings prove that 3D printing technology has the potential to revolutionize the road construction industry and provide more sustainable solutions for infrastructure development.

Förderung

  • Prince Sultan University

Zitieren

APA

Al-Atroush, M. E., Almushcab, J., Alhudaif, D., & Meskinyar, Y. (2023). Exploring the Potential of 3D Printing Technology for Sustainable Plastic Roads: A Preliminary Investigation. Sustainability, 15(24), 16777. https://doi.org/10.3390/su152416777

Vancouver

Al-Atroush ME, Almushcab J, Alhudaif D, Meskinyar Y. Exploring the Potential of 3D Printing Technology for Sustainable Plastic Roads: A Preliminary Investigation. Sustainability. 2023;15(24):16777. doi:10.3390/su152416777

BibTeX
@article{AlAtroush2023,
  author = {Al-Atroush, Mohamed Ezzat and Almushcab, Jumana and Alhudaif, Duha and Meskinyar, Yosra},
  title = {Exploring the Potential of 3D Printing Technology for Sustainable Plastic Roads: A Preliminary Investigation},
  journal = {Sustainability},
  year = {2023},
  volume = {15},
  number = {24},
  pages = {16777},
  doi = {10.3390/su152416777}
}
Kostenlos starten →