EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable Support Material for Overhang Printing in 3D Concrete Printing Technology

Guan Heng Andrew Ting, Yi Wei Daniel Tay, Tan Kai Noel Quah, Ming Jen Tan, Teck Neng Wong

Applied Sciences · 03.09.2024 · 14 (17) · 7800

DOI: 10.3390/app14177800 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 03.09.2024. Verfasst von Guan Heng Andrew Ting und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The advantage of 3DCP technologies is the ability to fabricate free-form structures. However, printing openings in concrete structures are limited by the presence of overhanging sections. While various 3D printing and additive manufacturing technologies have established methods for handling overhangs with temporary supports, many existing techniques for 3D concrete printing still rely on wooden planks and corbelling, which restrict the design flexibility and slope angles. The objective of this study is to develop a removable and sustainable support material with high printability performance. This support material serves as temporary support for overhang sections in 3D-printed structures and can be removed once the primary concrete has hardened sufficiently. This study observed that increasing the recycled glass content in the mixture raises both the dynamic and static yield stresses, with only mixtures containing up to 60% recycled glass remaining pumpable. Optimization of the mixture design aimed to balance high flowability and buildability, and the results indicated that a mixture with 60% recycled glass content is optimal. The effectiveness of the optimized support material was validated through the successful printing of a structure featuring a free-form opening and overhang section.

Zitieren

APA

Ting, G. H. A., Tay, Y. W. D., Quah, T. K. N., Tan, M. J., & Wong, T. N. (2024). Sustainable Support Material for Overhang Printing in 3D Concrete Printing Technology. Applied Sciences, 14(17), 7800. https://doi.org/10.3390/app14177800

Vancouver

Ting GHA, Tay YWD, Quah TKN, Tan MJ, Wong TN. Sustainable Support Material for Overhang Printing in 3D Concrete Printing Technology. Applied Sciences. 2024;14(17):7800. doi:10.3390/app14177800

BibTeX
@article{Ting2024,
  author = {Ting, Guan Heng Andrew and Tay, Yi Wei Daniel and Quah, Tan Kai Noel and Tan, Ming Jen and Wong, Teck Neng},
  title = {Sustainable Support Material for Overhang Printing in 3D Concrete Printing Technology},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {17},
  pages = {7800},
  doi = {10.3390/app14177800}
}
Kostenlos starten →