EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Plastic Waste Valorization for Fused Deposition Modeling Feedstock: A Case Study on Recycled Polyethylene Terephthalate/High-Density Polyethylene Sustainability

Amira Ragab, Rana Elazhary, Siegfried Schmauder, Amna Ramzy

Sustainability · 05.09.2023 · 15 (18) · 13291

DOI: 10.3390/su151813291 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 05.09.2023. Verfasst von Amira Ragab und 3 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Development Fund (STDF) in Egypt.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, material development, characterization, and sustainability assessment are performed on blends from recycled post-consumer commodity plastics for fused deposition modeling (FDM) filament extrusion. A recycled polyethylene terephthalate (rPET) and high-density polyethylene (rHDPE) blend 80:20 ratio is modified using three different methods: compatibilization with Maleic Anhydride, surface functionalization of PET with sodium dodecyl sulphate (SDS), and hybridization by combination of the two methods which is a novel approach. The selected blends were reinforced with chopped glass fibers and characterized. The printability of blends was assessed, and the dimensional accuracy of the prints was calculated. In addition, a cost estimation and comparison between the developed blends and the commercially available FDM filaments was carried out. Finally, life cycle assessment (LCA) was conducted for each prepared blend to facilitate the decision of the optimum blend in relation to mechanical properties and environmental performance and hence correlate the material, economic, and sustainability advantages.

Förderung

  • Science and Technology Development Fund (STDF) in Egypt

Zitieren

APA

Ragab, A., Elazhary, R., Schmauder, S., & Ramzy, A. (2023). Plastic Waste Valorization for Fused Deposition Modeling Feedstock: A Case Study on Recycled Polyethylene Terephthalate/High-Density Polyethylene Sustainability. Sustainability, 15(18), 13291. https://doi.org/10.3390/su151813291

Vancouver

Ragab A, Elazhary R, Schmauder S, Ramzy A. Plastic Waste Valorization for Fused Deposition Modeling Feedstock: A Case Study on Recycled Polyethylene Terephthalate/High-Density Polyethylene Sustainability. Sustainability. 2023;15(18):13291. doi:10.3390/su151813291

BibTeX
@article{Ragab2023,
  author = {Ragab, Amira and Elazhary, Rana and Schmauder, Siegfried and Ramzy, Amna},
  title = {Plastic Waste Valorization for Fused Deposition Modeling Feedstock: A Case Study on Recycled Polyethylene Terephthalate/High-Density Polyethylene Sustainability},
  journal = {Sustainability},
  year = {2023},
  volume = {15},
  number = {18},
  pages = {13291},
  doi = {10.3390/su151813291}
}
Kostenlos starten →