Mechanical Testing of Polyethylene Terephthalate Glycol Processed with Fused Deposition Modelling
Journal of Manufacturing and Materials Processing · 27.07.2026 · 10 (8) · 266
DOI: 10.3390/jmmp10080266 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 27.07.2026. Verfasst von Zoe Wakefield und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Polyethylene Terephthalate Glycol (PETG) is a thermoplastic material used in Fused Deposition Modelling for prosthetic applications, where mechanical properties are strongly dependent on process parameters. This study investigated the effects of carbon fibre (CF) content, print orientation (PO), and print temperature (PT) on the mechanical performance of PETG, fabricated using a Bambu Lab A1 printer. Tensile, three-point bending and impact testing were conducted to characterise the mechanical response of printed specimens. A Taguchi L9 array was employed to evaluate parameter effects while minimising experimental runs, and factor effects were quantified using per-response general linear models. Findings indicated that PO and PT significantly affected tensile behaviour, while CF content dominated flexural stiffness and impact response, with the strongest tensile response at 240 °C attributed to improved interlayer bonding. CF reinforcement increased stiffness and flexural strength but had limited effect on tensile strength and a reduced impact resistance at higher loadings, indicating increased brittleness. PO was identified as the most influential factor, with upright specimens exhibiting superior tensile performance, consistent with more favourable alignment of filament deposition with the loading direction. These findings demonstrate that the mechanical behaviour of CF-PETG is strongly process-dependent, informing its future application within prosthetic limb design.
Zitieren
APA
Wakefield, Z., Griffiths, C. A., Wet, T. D. D., & Thomas, A. J. (2026). Mechanical Testing of Polyethylene Terephthalate Glycol Processed with Fused Deposition Modelling. Journal of Manufacturing and Materials Processing, 10(8), 266. https://doi.org/10.3390/jmmp10080266
Vancouver
Wakefield Z, Griffiths CA, Wet TDD, Thomas AJ. Mechanical Testing of Polyethylene Terephthalate Glycol Processed with Fused Deposition Modelling. Journal of Manufacturing and Materials Processing. 2026;10(8):266. doi:10.3390/jmmp10080266
BibTeX
@article{Wakefield2026,
author = {Wakefield, Zoe and Griffiths, Christian A. and Wet, Talitha D. de and Thomas, Andrew J.},
title = {Mechanical Testing of Polyethylene Terephthalate Glycol Processed with Fused Deposition Modelling},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {8},
pages = {266},
doi = {10.3390/jmmp10080266}
}
EUVIMED