EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tailoring Polyethylenimine Dispersion and Pore Architecture in a Macroporous Resin via CTAB Modification for Enhanced Dilute CO2 Capture

Wanyue Zang, Chunlai Wang, Zhejiaji Zhu, Aijing Ma, Li Lv

Separations · 13.11.2026 · 13 (11) · 339

DOI: 10.3390/separations13110339 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Separations, online erschienen am 13.11.2026. Verfasst von Wanyue Zang und 4 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyethylenimine (PEI)-based solid amine adsorbents are commonly limited by pore blockage caused by PEI aggregation, low amine utilization in dilute CO2, and slow adsorption kinetics. Herein, PEI was impregnated into HP20 macroporous resin, and cetyltrimethylammonium bromide (CTAB) was introduced as a structural modifier to regulate the pore architecture and interfacial microenvironment. The resulting adsorbents were characterized and evaluated under dry, humid, and oxygen-containing conditions. CTAB dosage exerted a non-monotonic effect on CO2 uptake, with an optimum of 3.7 mg CTAB per 50 mg PEI. At 25 °C under a 5000 ppm CO2 feed, the optimized CTAB/PEI/HP20 reached 2.131 mmol·g−1, 13.2% higher than PEI/HP20, despite a lower BET surface area and total pore volume. This improvement is attributed mainly to enhanced amine-site accessibility rather than increased pore volume. The adsorbent also retained stable performance over ten adsorption–desorption cycles under all tested feeds, including humid conditions. This work establishes CTAB dosage as an effective variable for tailoring PEI dispersion and dilute CO2 capture in macroporous resin.

Zitieren

APA

Zang, W., Wang, C., Zhu, Z., Ma, A., & Lv, L. (2026). Tailoring Polyethylenimine Dispersion and Pore Architecture in a Macroporous Resin via CTAB Modification for Enhanced Dilute CO2 Capture. Separations, 13(11), 339. https://doi.org/10.3390/separations13110339

Vancouver

Zang W, Wang C, Zhu Z, Ma A, Lv L. Tailoring Polyethylenimine Dispersion and Pore Architecture in a Macroporous Resin via CTAB Modification for Enhanced Dilute CO2 Capture. Separations. 2026;13(11):339. doi:10.3390/separations13110339

BibTeX
@article{Zang2026,
  author = {Zang, Wanyue and Wang, Chunlai and Zhu, Zhejiaji and Ma, Aijing and Lv, Li},
  title = {Tailoring Polyethylenimine Dispersion and Pore Architecture in a Macroporous Resin via CTAB Modification for Enhanced Dilute CO2 Capture},
  journal = {Separations},
  year = {2026},
  volume = {13},
  number = {11},
  pages = {339},
  doi = {10.3390/separations13110339}
}
Kostenlos starten →