CO2 Capture with Polyethylenimine Supported on 3D-Printed Porous SiO2 Structures
Materials · 14.06.2024 · 17 (12) · 2913
DOI: 10.3390/ma17122913 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 14.06.2024. Verfasst von René Wick-Joliat und 4 weiteren Autor:innen. Beteiligte Einrichtung: IMPE Institute of Materials and Process Engineering, School of Engineering, ZHAW Zurich University of Applied Sciences, Technikumstrasse 9, 8401 Wint…. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: IBAM, Innovation Booster Additive Manufacturing, Switzerland, ZHAW Zurich University of Applied Sciences.
Abstract (Originalsprache)
Amines supported on porous solid materials have a high CO2 adsorption capacity and low regeneration temperature. However, the high amine load on such substrates and the substrate itself may lead to substantial pressure drop across the reactor. Herein, we compare the CO2 adsorption capacity and pressure drop of fumed silica powder to 3D-printed monolithic fumed silica structures, both functionalized by polyethylenimine (PEI), and find a drastically reduced pressure drop for 3D-printed substrates (0.01 bar vs. 0.76 bar) in the sorption bed with equal CO2 adsorption capacity. Furthermore, the effect of 3D-printing nozzle diameter and PEI loading on the adsorption capacity are investigated and the highest capacities (2.0 mmol/g at 25 °C with 5000 ppm CO2) are achieved with 0.4 mm nozzle size and 34 wt% PEI loading. These high capacities are achieved since the 3D printing and subsequent sintering (700 °C) of monolithic samples does not compromise the surface area of the fumed silica. Finally, the comparison between 3D-printed monoliths and extruded granulate of varying diameter reveals that the ordered channel system of 3D-printed structures is superior to randomly oriented granulate in terms of CO2 adsorption capacity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- IMPE Institute of Materials and Process Engineering, School of Engineering, ZHAW Zurich University of Applied Sciences, Technikumstrasse 9, 8401 Winterthur, Switzerland.
ORCID-Profile: René Wick-Joliat, Daniel M Meier, Dirk Penner
Förderung
- IBAM, Innovation Booster Additive Manufacturing, Switzerland
- ZHAW Zurich University of Applied Sciences
Zitieren
APA
Wick-Joliat, R., Weisshar, F. B., Gorbar, M., Meier, D. M., & Penner, D. (2024). CO2 Capture with Polyethylenimine Supported on 3D-Printed Porous SiO2 Structures. Materials, 17(12), 2913. https://doi.org/10.3390/ma17122913
Vancouver
Wick-Joliat R, Weisshar FB, Gorbar M, Meier DM, Penner D. CO2 Capture with Polyethylenimine Supported on 3D-Printed Porous SiO2 Structures. Materials. 2024;17(12):2913. doi:10.3390/ma17122913
BibTeX
@article{WickJoliat2024,
author = {Wick-Joliat, René and Weisshar, Florian B and Gorbar, Michal and Meier, Daniel M and Penner, Dirk},
title = {CO2 Capture with Polyethylenimine Supported on 3D-Printed Porous SiO2 Structures},
journal = {Materials},
year = {2024},
volume = {17},
number = {12},
pages = {2913},
doi = {10.3390/ma17122913}
}
EUVIMED