EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Cost-Effective Remediation of Slag Formed from Polymetallic Ores Rich in Nickel, Copper, and Cobalt by Reduction Settling Technique Using Readily Available Iron-Based Additives

Aleksandar Mitrašinović, Jasmina Nešković, Pavle Stjepanović, Josip Išek, Željko Praštalo, Svetlana Polavder

Sci · 2026-09-15 · 8 (9) · 260

DOI: 10.3390/sci8090260 ↗

At a glance

Journal article in Sci, published online on 2026-09-15. Written by Aleksandar Mitrašinović and 5 co-authors. Cited 2 times so far (Crossref); 53 references. The full text is freely available (open access, CC BY 4.0). Funded by: Ministry of Science, Technological Development and Innovation.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Remediating and recovering valuable metals from metallurgical slags is a critical challenge and opportunity for sustainable resource management in the metal extraction industry. This study investigates a process to simultaneously recover nickel, copper, and cobalt from nickel converter slag from the Sudbury region, Canada, using carbon- and iron-based reducing agents. Experimental results show that, without additives, performing reduction settling at 1300 °C, a process similar to metal extraction from ore concentrates, yielded 62 wt% recovery of valuable metals, while after adding reducing additives, over 90% of entrained valuable metals were efficiently coalesced into a matte phase within one hour, significantly reducing the hazardous metal content in the residual slag leaving mainly iron and silicon oxides, which are stable and environmentally benign. X-ray diffraction and SEM-EDS analyses show that after treatment, the dominant phases in the residual slag are fayalite (Fe2SiO4) and glassy silicates, with almost no detectable sulfide or metallic inclusions or other leachable metal-bearing phases. Estimated total cost to increase and maintain slag temperature at 1300 °C for 1 h is $44.50 per tonne. The exothermic reaction of ferrosilicon with slag provides 14.60 kWh/tonne of energy, reducing the need for external heating, while the value of recovered metals is about 10 times higher than the estimated capital, processing, and transportation costs of the additional process treatment. An efficient and sustainable approach to recovering valuable metals from nickel slag, using innovative chemistry and process integration, delivered high metal recovery, reduced environmental impact, and clear economic benefits. The proposed approach aligns with the United Nations Sustainable Development Goals, as outlined in the document ‘Transforming Our World: the 2030 Agenda’, supports circular economy principles, enhances resource efficiency, and offers a practical pathway for remediating legacy slag deposits in existing metals extraction facilities.

Funding

  • Ministry of Science, Technological Development and Innovation

Cite

APA

Mitrašinović, A., Nešković, J., Stjepanović, P., Išek, J., Praštalo, Ž., & Polavder, S. (2026). Cost-Effective Remediation of Slag Formed from Polymetallic Ores Rich in Nickel, Copper, and Cobalt by Reduction Settling Technique Using Readily Available Iron-Based Additives. Sci, 8(9), 260. https://doi.org/10.3390/sci8090260

Vancouver

Mitrašinović A, Nešković J, Stjepanović P, Išek J, Praštalo Ž, Polavder S. Cost-Effective Remediation of Slag Formed from Polymetallic Ores Rich in Nickel, Copper, and Cobalt by Reduction Settling Technique Using Readily Available Iron-Based Additives. Sci. 2026;8(9):260. doi:10.3390/sci8090260

BibTeX
@article{Mitrainovi2026,
  author = {Mitrašinović, Aleksandar and Nešković, Jasmina and Stjepanović, Pavle and Išek, Josip and Praštalo, Željko and Polavder, Svetlana},
  title = {Cost-Effective Remediation of Slag Formed from Polymetallic Ores Rich in Nickel, Copper, and Cobalt by Reduction Settling Technique Using Readily Available Iron-Based Additives},
  journal = {Sci},
  year = {2026},
  volume = {8},
  number = {9},
  pages = {260},
  doi = {10.3390/sci8090260}
}
Start for free →