EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Monolithically 3D-Printed CSRR-Based Microwave Sensor with Integrated Sample Container for Characterization of Water–Ethanol Mixtures

Abdelhak Hamid Allah, Guy Ayissi Eyebe, Frédéric Domingue

Sensors · 20.11.2026 · 26 (22) · 7335

DOI: 10.3390/s26227335 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 20.11.2026. Verfasst von Abdelhak Hamid Allah und 2 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a proof-of-concept monolithically 3D-printed microfluidic sensor based on a complementary split-ring resonator (CSRR) for in-sample complex permittivity characterization of liquid mixtures. Fabricated using a piezoelectric additive manufacturing electronics (AME) process, the device integrates the resonator and microfluidic open sample container within a single dielectric substrate, eliminating hybrid assembly steps and enhancing electromagnetic field–liquid interaction. Tested with water–ethanol mixtures (50–100% water volume fraction), the sensor exploits resonance perturbation for quantitative dielectric sensing. The unloaded sensor resonates at 2.205 GHz, while its resonance frequency shifts from 1.1687 to 1.0418 GHz across the investigated concentration range. The device exhibits a linear response (R2 = 0.9764), and achieves an effective sensitivity of −2.507 MHz/%, an average normalized sensitivity of 0.84%, a resolution of 1.06%, and a within-device repeatability of 0.24% RSD (mean) for a single printed device. This compact, cleanroom-free 3D-printed platform demonstrates the viability of AME-based fabrication for microfluidic and lab-on-chip dielectric sensing applications, highlighting its potential for low-volume parallel production.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Allah, A. H., Eyebe, G. A., & Domingue, F. (2026). A Monolithically 3D-Printed CSRR-Based Microwave Sensor with Integrated Sample Container for Characterization of Water–Ethanol Mixtures. Sensors, 26(22), 7335. https://doi.org/10.3390/s26227335

Vancouver

Allah AH, Eyebe GA, Domingue F. A Monolithically 3D-Printed CSRR-Based Microwave Sensor with Integrated Sample Container for Characterization of Water–Ethanol Mixtures. Sensors. 2026;26(22):7335. doi:10.3390/s26227335

BibTeX
@article{Allah2026,
  author = {Allah, Abdelhak Hamid and Eyebe, Guy Ayissi and Domingue, Frédéric},
  title = {A Monolithically 3D-Printed CSRR-Based Microwave Sensor with Integrated Sample Container for Characterization of Water–Ethanol Mixtures},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {22},
  pages = {7335},
  doi = {10.3390/s26227335}
}
Kostenlos starten →