EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Detection of Semi-Solid Materials Utilizing Triple-Rings CSRR Microwave Sensor

Ahmed Jamal Abdullah Al-Gburi iD, Norhanani Abd Rahman iD, Zahriladha Zakaria iD, Merih Palandoken iD

Sensors · 12.03.2023 · 23 (6) · 3058

DOI: 10.3390/s23063058 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 12.03.2023. Verfasst von Ahmed Jamal Abdullah Al-Gburi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Centre of Telecommunication Research & Innovation (CeTRI), Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer, Universiti Teknikal Malaysia Me…. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universiti Teknikal Malaysia Melaka (UTeM), Malaysia Ministry of Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article proposes the design, fabrication and measurement of a triple-rings complementary split-ring resonator (CSRR) microwave sensor for semi-solid material detection. The triple-rings CSRR sensor was developed based on the CSRR configuration with curve-feed designed together, utilizing a high-frequency structure simulator (HFSS) microwave studio. The designed triple rings CSRR sensor resonates at 2.5 GHz, performs in transmission mode, and senses shift in frequency. Six cases of the sample under tests (SUTs) were simulated and measured. These SUTs are Air (without SUT), Java turmeric, Mango ginger, Black Turmeric, Turmeric, and Di-water, and detailed sensitivity analysis is conducted for the frequency resonant at 2.5 GHz. The semi-solid tested mechanism is undertaken using a polypropylene (PP) tube. The samples of dielectric material are filled into PP tube channels and loaded in the CSRR centre hole. The e-fields near the resonator will affect the interaction with the SUTs. The finalized CSRR triple-rings sensor was incorporated with defective ground structure (DGS) to deliver high-performance characteristics in microstrip circuits, leading to a high Q-factor magnitude. The suggested sensor has a Q-factor of 520 at 2.5 GHz with high sensitivity of about 4.806 and 4.773 for Di-water and Turmeric samples, respectively. The relationship between loss tangent, permittivity, and Q-factor at the resonant frequency has been compared and discussed. These given outcomes make the presented sensor ideal for detecting semi-solid materials.

Schlagwörter

Stichwörter der Autor:innen

Q-factorcomplementary split ring resonator (CSRR)polypropylene (PP) tubesample under tests (SUTs)semi-solidsensitivitytriple-rings CSRR

Autor:innen und Institutionen

  • Centre of Telecommunication Research & Innovation (CeTRI), Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer, Universiti Teknikal Malaysia Melaka, Durian Tungal 76100, Malaysia.
  • Department of Electrical Engineering, Politeknik Port Dickson (PPD), Port Dickson 71250, Negeri Sembilan, Malaysia.
  • Department of Electrical and Electronics Engineering, Izmir Katip Celebi University, 35620 Izmir, Turkey.

ORCID-Profile: Ahmed Jamal Abdullah Al-Gburi, Norhanani Abd Rahman, Zahriladha Zakaria, Merih Palandoken

Förderung

  • Universiti Teknikal Malaysia Melaka (UTeM)
  • Malaysia Ministry of Higher Education

Zitieren

APA

Al-Gburi, A. J. A., Rahman, N. A., Zakaria, Z., & Palandoken, M. (2023). Detection of Semi-Solid Materials Utilizing Triple-Rings CSRR Microwave Sensor. Sensors, 23(6), 3058. https://doi.org/10.3390/s23063058

Vancouver

Al-Gburi AJA, Rahman NA, Zakaria Z, Palandoken M. Detection of Semi-Solid Materials Utilizing Triple-Rings CSRR Microwave Sensor. Sensors. 2023;23(6):3058. doi:10.3390/s23063058

BibTeX
@article{AlGburi2023,
  author = {Al-Gburi, Ahmed Jamal Abdullah and Rahman, Norhanani Abd and Zakaria, Zahriladha and Palandoken, Merih},
  title = {Detection of Semi-Solid Materials Utilizing Triple-Rings CSRR Microwave Sensor},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {6},
  pages = {3058},
  doi = {10.3390/s23063058}
}
Kostenlos starten →