EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimised Design and Characterisation of an Implantable Flexible Wireless Power-Transfer System Based on an LCC-S Topology

Xin Geng, Changshun Feng, Yang Li, Xiangyang Huang

Sensors · 13.11.2026 · 26 (22) · 7170

DOI: 10.3390/s26227170 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 13.11.2026. Verfasst von Xin Geng und 3 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes a flexible, misalignment-tolerant wireless power-transfer (WPT) system based on the inductor–capacitor–capacitor-series (LCC-S) compensation topology to address the low coupling efficiency and poor power stability of miniature receiver coils under complex body motion in implantable medical devices. Finite-element simulations using Ansys Maxwell are performed for flexible receiver coils with outer diameters below 20 mm to investigate electromagnetic-parameter variations at different bending curvatures. In air, the self- and mutual inductances initially decrease and then increase as the bending curvature increases. Under extreme bending (R = 20 mm), the inclined coil edges capture additional radial magnetic flux, accounting for the recovery of these parameters. In the simplified tissue model, the self-inductance increases overall by approximately 5–6% but decreases monotonically with bending, with a maximum variation of about 2.4%. System performance is evaluated through Maxwell–Simplorer field-circuit co-simulation and experimental validation. Owing to the zero-voltage-switching (ZVS) operation which the constant transmitter-coil current provided by the primary LCC network, the system delivers approximately 0.25 W of output power at a transmission efficiency above 21% at 13.56 MHz under severe bending, while the secondary side maintains a nearly constant output voltage. The resonant-frequency drift remains approximately 1.2%. The proposed design maintains stable power transfer under the tested bending conditions, without requiring complex control strategies.

Zitieren

APA

Geng, X., Feng, C., Li, Y., & Huang, X. (2026). Optimised Design and Characterisation of an Implantable Flexible Wireless Power-Transfer System Based on an LCC-S Topology. Sensors, 26(22), 7170. https://doi.org/10.3390/s26227170

Vancouver

Geng X, Feng C, Li Y, Huang X. Optimised Design and Characterisation of an Implantable Flexible Wireless Power-Transfer System Based on an LCC-S Topology. Sensors. 2026;26(22):7170. doi:10.3390/s26227170

BibTeX
@article{Geng2026,
  author = {Geng, Xin and Feng, Changshun and Li, Yang and Huang, Xiangyang},
  title = {Optimised Design and Characterisation of an Implantable Flexible Wireless Power-Transfer System Based on an LCC-S Topology},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {22},
  pages = {7170},
  doi = {10.3390/s26227170}
}
Kostenlos starten →