EUVIMEDEUVIMED entdecken
Crossref

Fault-Tolerant Wireless Power Transfer System With S/S and LCC/S-Based Input-Series Output-Parallel Hybrid Topology

Zihan Tian, Shihao Cheng, Dengrui Liu, Rong Fan, Shuren Liu, Chenbo Wang, Fuyao Yang, Yang Zhan, Guorui Xu, Haisen Zhao

IEEE Transactions on Industrial Electronics · 2026-03 · 73 (3) · 3850-3861

DOI: 10.1109/tie.2025.3603039 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Industrial Electronics, 2026-03. Verfasst von Zihan Tian und 9 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 26 Literaturangaben. Gefördert von: National Key R&D Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Typical faults such as open circuit (OC), short circuit, and abnormal coupling seriously threaten the safety of conventional wireless power transfer (WPT) systems, so fault tolerance is a critical design consideration for WPT systems, especially in high-power applications. This study proposes an S/S and LCC/S-based input-series output-parallel hybrid topology, with which WPT systems can tolerate typical faults and realize zero phase angle under normal operation. Considering common misalignment conditions, a receiver-side control strategy without dual-side communication is also designed for minimum fault current ratios and power sharing between the two subtopologies under normal operation, and a system design method for constant power output is then given. A WPT prototype with the proposed hybrid topology is developed, and the experimental validation is performed. The results show that the steady-state fault current is about two times the normal value under various faults, and the system can even operate with an abnormal close coupling or OC fault at the transmitting coil branch in the LCC/S subtopology.

Förderung

  • National Key R&D Program of China

Zitieren

APA

Tian, Z., Cheng, S., Liu, D., Fan, R., Liu, S., Wang, C., Yang, F., Zhan, Y., Xu, G., & Zhao, H. (2026). Fault-Tolerant Wireless Power Transfer System With S/S and LCC/S-Based Input-Series Output-Parallel Hybrid Topology. IEEE Transactions on Industrial Electronics, 73(3), 3850-3861. https://doi.org/10.1109/tie.2025.3603039

Vancouver

Tian Z, Cheng S, Liu D, Fan R, Liu S, Wang C, et al. Fault-Tolerant Wireless Power Transfer System With S/S and LCC/S-Based Input-Series Output-Parallel Hybrid Topology. IEEE Transactions on Industrial Electronics. 2026;73(3):3850-3861. doi:10.1109/tie.2025.3603039

BibTeX
@article{Tian2026,
  author = {Tian, Zihan and Cheng, Shihao and Liu, Dengrui and Fan, Rong and Liu, Shuren and Wang, Chenbo and Yang, Fuyao and Zhan, Yang and Xu, Guorui and Zhao, Haisen},
  title = {Fault-Tolerant Wireless Power Transfer System With S/S and LCC/S-Based Input-Series Output-Parallel Hybrid Topology},
  journal = {IEEE Transactions on Industrial Electronics},
  year = {2026},
  volume = {73},
  number = {3},
  pages = {3850--3861},
  doi = {10.1109/tie.2025.3603039}
}
Kostenlos starten →