Performance of an Inclinometer for Inertia-Based Robotic Stability Monitoring System Under Cross-Axis Angular Deviations
Sensors · 29.10.2026 · 26 (21) · 6831
DOI: 10.3390/s26216831 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 29.10.2026. Verfasst von Mateusz Fiedeń und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Fundamentals of Machine Design and Mechatronic Systems K61W10D07, Faculty of Mechanical Engineering, Wrocław University of Science and …. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Wrocław University of Science and Technology, by the program “Finansowanie kosztów publikacji 2026”.
Abstract (Originalsprache)
Autonomous heavy machinery and mobile robots require accurate real-time angular state monitoring to ensure stability and prevent tip-over accidents. However, sensor mounting imperfections and operating on slopes can introduce cross-axis distortions in inclination readings. This research investigates the angle tracking accuracy and cross-axis resilience of the IFM JD1121 industrial single-axis dynamic inclinometer. Experimental validation is performed on a custom mechatronic test stand driven by a stepper motor executing a repeatable 30 s motion profile from −30° to +90°. Cross-axis interference is evaluated across automated multi-trial runs under fixed lateral angular offsets of 0°, 10°, 20°, and 30°. A preliminary field test is conducted on a mobile demolition robot using a camera-tracked ArUco marker as an optical reference. Inclinometer performance is evaluated using statistical metrics, including maximum error, mean error, mean absolute error, and SD. Quantitative cross-axis sensitivity analysis revealed low coupling coefficient, while equivalence testing (TOST) confirmed that lateral roll offsets up to 30° cause very small degradation in pitch accuracy. The preliminary field test indicated stable on-platform tracking, supporting further development of the sensor for anti-tip safety monitoring in industrial mobile platforms/robots and heavy machinery.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Fundamentals of Machine Design and Mechatronic Systems K61W10D07, Faculty of Mechanical Engineering, Wrocław University of Science and Technology, Łukasiewicza St. 7/9, 50-371 Wroclaw, Poland.
ORCID-Profile: Mateusz Fiedeń, Michał Olinski
Förderung
- Wrocław University of Science and Technology, by the program “Finansowanie kosztów publikacji 2026”
Zitieren
APA
Fiedeń, M., & Olinski, M. (2026). Performance of an Inclinometer for Inertia-Based Robotic Stability Monitoring System Under Cross-Axis Angular Deviations. Sensors, 26(21), 6831. https://doi.org/10.3390/s26216831
Vancouver
Fiedeń M, Olinski M. Performance of an Inclinometer for Inertia-Based Robotic Stability Monitoring System Under Cross-Axis Angular Deviations. Sensors. 2026;26(21):6831. doi:10.3390/s26216831
BibTeX
@article{Fiede2026,
author = {Fiedeń, Mateusz and Olinski, Michał},
title = {Performance of an Inclinometer for Inertia-Based Robotic Stability Monitoring System Under Cross-Axis Angular Deviations},
journal = {Sensors},
year = {2026},
volume = {26},
number = {21},
pages = {6831},
doi = {10.3390/s26216831}
}
EUVIMED