EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Metrology-Driven Self-Calibration Framework for Terrestrial Laser Scanner Sensor Systems

Honglei Yuan iD, Guangyun Li, Li Wang, Xiangfei Li

Sensors · 20.08.2026 · 26 (16) · 5273

DOI: 10.3390/s26165273 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 20.08.2026. Verfasst von Honglei Yuan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Geospatial Information, Information Engineering University, Zhengzhou 450001, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, the Key Scientific Research Project for University Teachers in Henan Province, the Open Fund Project of the Key Laboratory of the Ministry of Natural Resources.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Terrestrial laser scanning (TLS), also referred to as terrestrial LiDAR, has become an essential close-range remote sensing technique for high-precision engineering surveying, deformation monitoring, industrial inspection, and cultural heritage documentation. The geometric reliability of TLS point clouds strongly depends on the effective compensation of instrumental systematic errors through in situ self-calibration. However, conventional target-based self-calibration often suffers from strong coupling between calibration parameters and exterior orientation parameters, whereas recently developed coplanarity-constrained formulations generally require highly redundant target networks, limiting their field efficiency. To address this limitation, this study proposes a variance inflation factor (VIF)-driven minimal network design strategy for efficient in situ geometric self-calibration of TLS systems. Unlike the commonly used geometric dilution of precision, VIF provides a dimensionless statistical alternative that effectively resolves the dimensional inconsistency inherent in traditional GDOP when handling mixed angular and distance parameters. A differential evolution algorithm is employed to search for hybrid calibration networks that minimize parameter coupling while preserving the physical interpretability of the National Institute of Standards and Technology (NIST) 10-parameter instrumental error model. Five digital twin simulation experiments and a physical validation experiment using a Faro Focus 350 scanner were conducted to evaluate the proposed method. The results show that the optimized network substantially reduces the number of required targets while maintaining high calibration accuracy. The final configuration, which combines VIF-optimized target placement with a dual-station height-difference constraint, reduces the condition number of the normal equations to below 60 and yields a mean system VIF close to 10. The maximum parameter correlation coefficient among the key calibration parameters is constrained to approximately 0.75, indicating near-optimal parameter decoupling under the limited field-of-view geometry of the instrument. These findings demonstrate that the proposed VIF-driven network design provides a highly effective strategy for field-efficient TLS self-calibration and improves the geometric reliability of terrestrial LiDAR point clouds in high-precision remote sensing applications.

Schlagwörter

Stichwörter der Autor:innen

calibration network designpoint cloud accuracyself-calibrationterrestrial LiDARterrestrial laser scanningvariance inflation factor

Autor:innen und Institutionen

  • Institute of Geospatial Information, Information Engineering University, Zhengzhou 450001, China.
  • Shanxi Institute of Surveying Mapping and Geoinformation, Taiyuan 030001, China.

ORCID-Profile: Honglei Yuan

Förderung

  • National Natural Science Foundation of China
  • the Key Scientific Research Project for University Teachers in Henan Province
  • the Open Fund Project of the Key Laboratory of the Ministry of Natural Resources
  • Key Scientific Research Project for University Teachers in Henan Province
  • Open Fund Project of the Key Laboratory of the Ministry of Natural Resources

Zitieren

APA

Yuan, H., Li, G., Wang, L., & Li, X. (2026). A Metrology-Driven Self-Calibration Framework for Terrestrial Laser Scanner Sensor Systems. Sensors, 26(16), 5273. https://doi.org/10.3390/s26165273

Vancouver

Yuan H, Li G, Wang L, Li X. A Metrology-Driven Self-Calibration Framework for Terrestrial Laser Scanner Sensor Systems. Sensors. 2026;26(16):5273. doi:10.3390/s26165273

BibTeX
@article{Yuan2026,
  author = {Yuan, Honglei and Li, Guangyun and Wang, Li and Li, Xiangfei},
  title = {A Metrology-Driven Self-Calibration Framework for Terrestrial Laser Scanner Sensor Systems},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {16},
  pages = {5273},
  doi = {10.3390/s26165273}
}
Kostenlos starten →