EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design, Modeling and Performance Analysis of an Actively Variable Stiffness Pneumatic Flexible Bending Joint

Xia Wang, Haoran Yuan iD, Pei Wang iD, Peng Gao, Honghao Xing, Mingyang Han, He Peng iD

Sensors · 17.08.2026 · 26 (16) · 5200

DOI: 10.3390/s26165200 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 17.08.2026. Verfasst von Xia Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Beihua University, Jilin 132021, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jilin Province Science and Technology Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The contradiction between high compliance and low load-bearing capacity of flexible manipulators limits their engineering applications. Meanwhile, the theoretical modeling of the deformation and variable stiffness characteristics of flexible joints still faces considerable challenges. This paper proposes a positive-pressure double-airbag gap-constrained particle-jamming variable stiffness method and develops a novel actively variable stiffness pneumatic flexible bending joint with an integrated configuration of actuator, variable stiffness device (VSD), and primary structure. Based on classical elasticity theory and Coulomb–Amontons’ law of friction, theoretical models for the bending angle and tangential stiffness are established and verified through prototype experiments. With VSD activation, the joint reaches a bending angle of 56.35° at 0.4 MPa. At 40° forward bending, VSD activation increases the tangential stiffness from 0.167 N/mm to 0.832 N/mm, with the stiffness ratio between 40° and 0° increasing from 1.56 without VSD to 4.80 with VSD activation. Model predictions agree well with experimental data, yielding mean relative errors of 6.77% for the bending-angle model with VSD and 6.76% for the forward tangential-stiffness model with VSD activation. A coupling effect between bending deformation and stiffness is observed. The results demonstrate that the proposed joint achieves substantial stiffness regulation, providing a basis for its application in flexible robotic systems.

Schlagwörter

Stichwörter der Autor:innen

actively variable stiffnessflexible bending jointparticle jammingperformance analysispneumatic actuation

Autor:innen und Institutionen

  • College of Mechanical Engineering, Beihua University, Jilin 132021, China.
  • Beijing Spacecraft Manufacturing Co., Ltd., Beijing 100094, China.

ORCID-Profile: Haoran Yuan, Pei Wang, He Peng

Förderung

  • Jilin Province Science and Technology Department

Zitieren

APA

Wang, X., Yuan, H., Wang, P., Gao, P., Xing, H., Han, M., & Peng, H. (2026). Design, Modeling and Performance Analysis of an Actively Variable Stiffness Pneumatic Flexible Bending Joint. Sensors, 26(16), 5200. https://doi.org/10.3390/s26165200

Vancouver

Wang X, Yuan H, Wang P, Gao P, Xing H, Han M, et al. Design, Modeling and Performance Analysis of an Actively Variable Stiffness Pneumatic Flexible Bending Joint. Sensors. 2026;26(16):5200. doi:10.3390/s26165200

BibTeX
@article{Wang2026,
  author = {Wang, Xia and Yuan, Haoran and Wang, Pei and Gao, Peng and Xing, Honghao and Han, Mingyang and Peng, He},
  title = {Design, Modeling and Performance Analysis of an Actively Variable Stiffness Pneumatic Flexible Bending Joint},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {16},
  pages = {5200},
  doi = {10.3390/s26165200}
}
Kostenlos starten →