EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Performance Path Tracking of a 4WD Autonomous Vehicle Using NMPC with Virtual 4WD Torque Distribution

Duc Hiep Vu, Chih-Keng Chen iD, Jiageng Ruan iD

Sensors · 13.07.2026 · 26 (14) · 4442

DOI: 10.3390/s26144442 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 13.07.2026. Verfasst von Duc Hiep Vu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Vehicle Engineering, National Taipei University of Technology, Taipei 10604, Taiwan. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Taipei University of Technology, National Taipei University of Technology-Beijing University of Technology Joint Research Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study proposes a reduced-complexity nonlinear model predictive control (NMPC) framework for high-performance path tracking of a four-wheel-drive (4WD) autonomous vehicle. A 4WD sports car equipped with four independent wheel motors is used as the test vehicle. Although the vehicle has four motors, the proposed NMPC directly optimizes the front-wheel steering command and the rear-left and rear-right wheel torque commands, while the front-wheel torques are generated using a gain-based virtual 4WD distribution law. Trajectory optimization (TRO) is performed offline to generate the reference racing line and velocity profile, while the online NMPC controller tracks the optimized reference trajectory using the front-wheel steering command and the rear-left and rear-right wheel torque commands as control inputs. This structure reduces the control complexity while maintaining the ability to improve traction utilization and yaw response. Under the investigated simulation conditions on the Shanghai International Circuit, the proposed reduced-dimensional NMPC with rear-dominant virtual 4WD torque distribution reduces the simulated lap time while maintaining bounded path-tracking errors and satisfying the track-boundary constraints. As the torque distribution gain Kr increases from 0 to 0.5, the lap time is reduced by approximately 10.3% (from 182.08 s to 163.30 s), while the maximum lateral tracking error remains below 0.33 m and the maximum heading-angle error remains below 2.95 deg for all stable cases. However, further increasing Kr beyond 0.5 leads to degraded tracking performance or loss of stable path following because excessive front-wheel longitudinal force reduces the available lateral tire force for steering. These results indicate that an appropriate torque distribution gain can improve corner-exit acceleration and overall lap-time performance, whereas excessive front torque assistance may degrade tracking accuracy and vehicle stability.

Schlagwörter

Stichwörter der Autor:innen

nonlinear model predictive control (NMPC)torque distributiontrajectory optimizationvirtual 4WD

Autor:innen und Institutionen

  • Department of Vehicle Engineering, National Taipei University of Technology, Taipei 10604, Taiwan.
  • College of Mechanical and Energy Engineering, Beijing University of Technology, Beijing 100020, China.

ORCID-Profile: Chih-Keng Chen, Jiageng Ruan

Förderung

  • National Taipei University of Technology
  • National Taipei University of Technology-Beijing University of Technology Joint Research Program

Zitieren

APA

Vu, D. H., Chen, C. K., & Ruan, J. (2026). High-Performance Path Tracking of a 4WD Autonomous Vehicle Using NMPC with Virtual 4WD Torque Distribution. Sensors, 26(14), 4442. https://doi.org/10.3390/s26144442

Vancouver

Vu DH, Chen CK, Ruan J. High-Performance Path Tracking of a 4WD Autonomous Vehicle Using NMPC with Virtual 4WD Torque Distribution. Sensors. 2026;26(14):4442. doi:10.3390/s26144442

BibTeX
@article{Vu2026,
  author = {Vu, Duc Hiep and Chen, Chih-Keng and Ruan, Jiageng},
  title = {High-Performance Path Tracking of a 4WD Autonomous Vehicle Using NMPC with Virtual 4WD Torque Distribution},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {14},
  pages = {4442},
  doi = {10.3390/s26144442}
}
Kostenlos starten →