Real-Time Embedded NMPC for Autonomous Vehicle Path Tracking with Curvature-Aware Speed Adaptation and Sensitivity Analysis
Automation · 06.03.2026 · 7 (2) · 44
DOI: 10.3390/automation7020044 ↗Kurz gefasst
Fachartikel in der Zeitschrift Automation, online erschienen am 06.03.2026. Verfasst von Taoufik Belkebir und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Local path tracking is a critical challenge for autonomous vehicles, requiring precise trajectory following under nonlinear dynamics, strict constraints, and real-time execution. While Nonlinear Model Predictive Control (NMPC) has emerged as a leading approach, many existing methods decouple velocity planning from tracking, lack formal stability guarantees, or do not demonstrate feasibility on embedded platforms. We present a unified NMPC framework that integrates curvature-aware velocity adaptation directly into the cost function. The controller makes use of cubic spline paths, recursive feasibility constraints, and Lyapunov-based terminal costs to ensure stability. The nonlinear optimization problem is implemented in CasADi and solved using IPOPT, with warm-starting and efficient discretization techniques enabling real-time performance. Our approach has been validated in the CARLA simulator across a variety of urban scenarios, including straight roads, intersections, and roundabouts. The controller achieves a mean cross-track error of 0.10 m on straight roads, 0.44 m on roundabouts, and 1.36 m on tight intersections, while maintaining smooth control inputs and bounded actuator effort. A curvature-aware cost term yields a 14.4% reduction in lateral tracking error compared to the curvature-unaware baseline. Benchmarking results indicate that the Raspberry Pi 5 outperforms the NVIDIA Xavier AGX by 1.5–1.6×, achieving mean execution times of 38–45 ms across all scenarios. This demonstrates that advanced NMPC can run in real time on low-cost consumer hardware ($80 vs. $700). Systematic ablation studies reveal the critical role of state weighting (Q) and input regularization (R): removing Q degrades tracking by 10% and destabilizes control effort (+54% acceleration, +477% steering), while omitting R induces oscillatory behavior with +907% acceleration effort. Euler integration provides no computational benefit (+8% solver time) while degrading accuracy by 25%, confirming RK4 as strictly superior. Sensitivity analysis via Latin Hypercube Sampling identifies the prediction horizon (N) and discretization timestep (Δt) as dominant parameters. Per-scenario Pareto analysis yields a balanced operating point (N=15, Δt=0.055 s) used for all primary evaluations, while a global sweep identifies a robust alternative (N=12, Δt=0.086 s) suitable for general deployment tuning. This framework bridges the gap between spline-based local planning and stability-guaranteed NMPC, offering a simulation-validated, real-time solution for embedded autonomous driving research. Future work will focus on hardware-in-the-loop and full-vehicle deployment, integration with high-level decision-making, and learning-enhanced MPC.
Zitieren
APA
Belkebir, T., Belkebir, H., & Mansouri, A. (2026). Real-Time Embedded NMPC for Autonomous Vehicle Path Tracking with Curvature-Aware Speed Adaptation and Sensitivity Analysis. Automation, 7(2), 44. https://doi.org/10.3390/automation7020044
Vancouver
Belkebir T, Belkebir H, Mansouri A. Real-Time Embedded NMPC for Autonomous Vehicle Path Tracking with Curvature-Aware Speed Adaptation and Sensitivity Analysis. Automation. 2026;7(2):44. doi:10.3390/automation7020044
BibTeX
@article{Belkebir2026,
author = {Belkebir, Taoufik and Belkebir, Hicham and Mansouri, Anass},
title = {Real-Time Embedded NMPC for Autonomous Vehicle Path Tracking with Curvature-Aware Speed Adaptation and Sensitivity Analysis},
journal = {Automation},
year = {2026},
volume = {7},
number = {2},
pages = {44},
doi = {10.3390/automation7020044}
}
EUVIMED