EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Cold-Working Deformation on the Measurement Accuracy and Stability of Type-K Sheathed Thermocouple Sensors

Jie Chen iD, Xiaodong Peng iD, Min Liu, Zheng Sun iD, Anzhong Zhao, Jixiang Xie

Sensors · 06.07.2026 · 26 (13) · 4288

DOI: 10.3390/s26134288 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 06.07.2026. Verfasst von Jie Chen und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Intelligent Manufacturing and Automobile, Chongqing Polytechnic University of Electronic Technology, Chongqing 401331, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Program of Chongqing Municipal Education Commission, Natural Science Foundation of Chongqing.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of cold-working deformation on the electromotive force (EMF) calibration characteristics, hysteresis behavior, and long-term stability of the Type-K mineral-insulated metal-sheathed (MIMS) thermocouples used in Combination Fixed In-Core Detector Assemblies for pressurized water reactor nuclear power plants. Reduction ratios of 12%, 28%, and 38% were investigated, and samples were subjected to heating–cooling calibration and in situ aging tests. The results show that increased cold-working deformation leads to greater negative EMF deviation and larger heating–cooling hysteresis, mainly affected by the degradation of the positive KP thermoelement. Cold-working lowers the atomic diffusion activation energy and accelerates element migration, resulting in pronounced EMF drift during isothermal aging at 350 °C for 720 h. After aging below the order–disorder transition temperature, stable ordered structures form in the thermoelement alloys and hysteresis is significantly reduced. However, within the range investigated in this study, deformation above 28% imparts irreversible effects. The EMFs of 28% and 38% deformed samples remained lower than that of the undeformed state even after isothermal aging at 700 °C for 500 h. These findings reveal that excessive cold-working deformation severely impairs the measurement accuracy and long-term stability of the thermocouples, highlighting the necessity of the strict control of drawing deformation to ensure the reliability of nuclear-grade thermocouples under both normal and abnormal reactor operating conditions.

Schlagwörter

Stichwörter der Autor:innen

cold-workingelectromotive force (EMF) driftstabilitythermocouple

Autor:innen und Institutionen

  • School of Intelligent Manufacturing and Automobile, Chongqing Polytechnic University of Electronic Technology, Chongqing 401331, China.
  • Department of Material Science and Engineering, Chongqing University, Chongqing 400044, China.
  • Chongqing Material Research Institute Co., Ltd., Chongqing 400707, China.

ORCID-Profile: Jie Chen, Xiaodong Peng, Zheng Sun

Förderung

  • Science and Technology Program of Chongqing Municipal Education Commission
  • Natural Science Foundation of Chongqing

Zitieren

APA

Chen, J., Peng, X., Liu, M., Sun, Z., Zhao, A., & Xie, J. (2026). The Influence of Cold-Working Deformation on the Measurement Accuracy and Stability of Type-K Sheathed Thermocouple Sensors. Sensors, 26(13), 4288. https://doi.org/10.3390/s26134288

Vancouver

Chen J, Peng X, Liu M, Sun Z, Zhao A, Xie J. The Influence of Cold-Working Deformation on the Measurement Accuracy and Stability of Type-K Sheathed Thermocouple Sensors. Sensors. 2026;26(13):4288. doi:10.3390/s26134288

BibTeX
@article{Chen2026,
  author = {Chen, Jie and Peng, Xiaodong and Liu, Min and Sun, Zheng and Zhao, Anzhong and Xie, Jixiang},
  title = {The Influence of Cold-Working Deformation on the Measurement Accuracy and Stability of Type-K Sheathed Thermocouple Sensors},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {13},
  pages = {4288},
  doi = {10.3390/s26134288}
}
Kostenlos starten →