EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Two-Step 3D Microphone Array Fusion Algorithm to Enhance Sound Source Location Measurements

Mahya Shahmohammadimehrjardi iD, Bruce Wallace iD, Adrian D C Chan iD, Rafik Goubran iD, Pengcheng Xi iD

Sensors · 2026-06-15 · 26 (12) · 3798

DOI: 10.3390/s26123798 ↗

At a glance

Journal article in Sensors, published online on 2026-06-15. Written by Mahya Shahmohammadimehrjardi and 4 co-authors. Institution: Systems and Computer Engineering, Carleton University, Ottawa, ON K1S 5B6, Canada. 33 references. The full text is freely available (open access, CC BY 4.0). Funded by: TELUS Communications, MITACs, National Research Council of Canada.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This paper presents a novel two-step algorithm for microphone array fusion to enhance sound source localization (SSL) in three-dimensional indoor reverberant environments. Simulation analyses using simulated Room Impulse Responses (RIRs) reveal that Angle-of-Arrival (AoA) accuracy varies significantly with source position, causing certain microphone arrays to produce unreliable estimates. To mitigate this, the algorithm excludes microphone pairs with low-confidence AoAs, thereby improving overall localization accuracy. To extend the applicability of the approach, a generalized version of the algorithm is proposed for arbitrary room geometries and array positions on each wall. Its performance is assessed across three scenarios: (1) the original room geometry with arrays placed at the center of each wall; (2) a room with different dimensions; and (3) arrays placed at arbitrary positions on walls. The results show that the generalized algorithm achieves similar improvements as the original two-step method, approximately halving the localization error. Moreover, while room geometry and array placement influence SSL accuracy, the generalized method consistently reduces error across all cases. Three conventional AoA estimation methods are evaluated and their performance is compared in the baseline SSL. These findings highlight the robustness and practical value of the proposed algorithm on the baseline methods for improving SSL performance in acoustically challenging environments.

Subjects

Author keywords

indoor 3D sound source localizationmicrophone arrayssmart microphone subset choosing

Authors and institutions

  • Systems and Computer Engineering, Carleton University, Ottawa, ON K1S 5B6, Canada.
  • SAM3 Innovation Hub, Ottawa, ON K1S 5B6, Canada.
  • Bruyère Health Research Institute, Ottawa, ON K1N 5C8, Canada.
  • National Research Council Canada, Ottawa, ON K1A 0R6, Canada.

ORCID profiles: Mahya Shahmohammadimehrjardi, Bruce Wallace, Adrian D C Chan, Rafik Goubran, Pengcheng Xi

Funding

  • TELUS Communications
  • MITACs
  • National Research Council of Canada

Cite

APA

Shahmohammadimehrjardi, M., Wallace, B., Chan, A. D. C., Goubran, R., & Xi, P. (2026). Two-Step 3D Microphone Array Fusion Algorithm to Enhance Sound Source Location Measurements. Sensors, 26(12), 3798. https://doi.org/10.3390/s26123798

Vancouver

Shahmohammadimehrjardi M, Wallace B, Chan ADC, Goubran R, Xi P. Two-Step 3D Microphone Array Fusion Algorithm to Enhance Sound Source Location Measurements. Sensors. 2026;26(12):3798. doi:10.3390/s26123798

BibTeX
@article{Shahmohammadimehrjardi2026,
  author = {Shahmohammadimehrjardi, Mahya and Wallace, Bruce and Chan, Adrian D C and Goubran, Rafik and Xi, Pengcheng},
  title = {Two-Step 3D Microphone Array Fusion Algorithm to Enhance Sound Source Location Measurements},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {12},
  pages = {3798},
  doi = {10.3390/s26123798}
}
Start for free →