A Robust Current-Feedback Operational Amplifier-Based Front-End Amplifier for Electrocardiogram Signal Noise Removal
Sensors · 08.06.2026 · 26 (12) · 3665
DOI: 10.3390/s26123665 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 08.06.2026. Verfasst von Suchada Sitjongsataporn und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic Engineering, School of Electrical and Electronic Engineering (SEE), Mahanakorn University of Technology, Nongchok, Bangkok 1…. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Thailand Program Management Unit for Human Resources & Institutional Development, Research and Innovation (PMU-B).
Abstract (Originalsprache)
This paper introduces an electrocardiogram (ECG) noise removal front-end amplifier circuit based on a current-feedback operational amplifier (CFOA) that uses the current feedback to detect error signals and control the output. This ECG circuit focuses on denoising the ECG noise to accentuate the ECG electrical signals from the heart. Noises in ECG refer to baseline wander (BW), powerline interference (PLI) and motion artifacts. We proposed a CFOA-based ECG pre-amplifier using the AD844 commercial operational amplifier built inside with a positive second-generation current conveyor (CCII+) and a voltage follower circuit. This work introduces an ECG noise removal front-end amplifier based on a CFOA. The primary innovation lies in the balancing instrumentation amplifier architecture that utilizes the high-speed and robust properties of the AD844 commercial operational amplifier to achieve superior noise rejection. To protect against high-frequency interference, we introduce a novel cascaded low-pass filter (LPF) stage that ensures a sharper cut-off compared to traditional single-stage designs. Experimental results validate the design’s effectiveness, achieving a high common-mode rejection ratio (CMRR) of 75.4 dB and a mid-band gain of 46.5 dB. These performance metrics, combined with the circuit’s ability to eliminate BW and PLI, confirm its robust suitability for high-fidelity wearable ECG monitoring.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electronic Engineering, School of Electrical and Electronic Engineering (SEE), Mahanakorn University of Technology, Nongchok, Bangkok 10530, Thailand.
- Center of Excellence in Sustainable Engineering, Mahanakorn University of Technology, Nongchok, Bangkok 10530, Thailand.
ORCID-Profile: Suchada Sitjongsataporn, Panavy Pookaiyaudom, Phimchanok Sakunpongpitiporn, Pipat Sakarin, Panlop Puntuprecharat, Prajuab Pawarangkoon
Förderung
- Thailand Program Management Unit for Human Resources & Institutional Development, Research and Innovation (PMU-B)
Zitieren
APA
Sitjongsataporn, S., Pookaiyaudom, P., Sakunpongpitiporn, P., Sakarin, P., Puntuprecharat, P., & Pawarangkoon, P. (2026). A Robust Current-Feedback Operational Amplifier-Based Front-End Amplifier for Electrocardiogram Signal Noise Removal. Sensors, 26(12), 3665. https://doi.org/10.3390/s26123665
Vancouver
Sitjongsataporn S, Pookaiyaudom P, Sakunpongpitiporn P, Sakarin P, Puntuprecharat P, Pawarangkoon P. A Robust Current-Feedback Operational Amplifier-Based Front-End Amplifier for Electrocardiogram Signal Noise Removal. Sensors. 2026;26(12):3665. doi:10.3390/s26123665
BibTeX
@article{Sitjongsataporn2026,
author = {Sitjongsataporn, Suchada and Pookaiyaudom, Panavy and Sakunpongpitiporn, Phimchanok and Sakarin, Pipat and Puntuprecharat, Panlop and Pawarangkoon, Prajuab},
title = {A Robust Current-Feedback Operational Amplifier-Based Front-End Amplifier for Electrocardiogram Signal Noise Removal},
journal = {Sensors},
year = {2026},
volume = {26},
number = {12},
pages = {3665},
doi = {10.3390/s26123665}
}
EUVIMED