EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Verification of a New Universal Active Filter Based on the Current Feedback Operational Amplifier and Commercial AD844 Integrated Circuit

Hua-Pin Chen iD, I-Chyn Wey, Liang-Yen Chen, Cheng-Yueh Wu, San-Fu Wang

Sensors · 05.10.2023 · 23 (19) · 8258

DOI: 10.3390/s23198258 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 05.10.2023. Verfasst von Hua-Pin Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic Engineering, Ming Chi University of Technology, New Taipei 24301, Taiwan. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a triple-input and four-output type voltage-mode universal active filter based on three current-feedback operational amplifiers (CFOAs). The filter employs three CFOAs, two grounded capacitors, and six resistors. The filter structure has three high-input and three low-output impedances that simultaneously provide band-reject, high-pass, low-pass, and band-pass filtering functions with single-input and four-output type and also implements an all-pass filtering function by connecting three input signals to one input without the use of voltage inverters or switches. The same circuit configuration enables two unique filtering functions: low-pass notch and high-pass notch. Three CFOAs with three high-input and low-output impedance terminals enable cascading without voltage buffers. The circuit is implemented using three commercial off-the-shelf AD844 integrated circuits, two grounded capacitors, and six resistors and further implemented as a CFOA-based chip using three CFOAs, two grounded capacitors, and six resistors. The CFOA-based chip has lower power consumption and higher integration than the AD844-based filter. The circuit was simulated using OrCAD PSpice to verify the AD844-based filter and Synopsys HSpice for post-layout simulation of the CFOA-based chip. The theoretical analysis is validated and confirmed by measurements on an AD844-based filter and a CFOA-based chip.

Schlagwörter

Stichwörter der Autor:innen

analog circuit designchip implementationuniversal filtervoltage-mode filter

Autor:innen und Institutionen

  • Department of Electronic Engineering, Ming Chi University of Technology, New Taipei 24301, Taiwan.
  • Department of Electrical Engineering, Chang Gung University, Taoyuan City 33302, Taiwan.
  • Department of Electronic Engineering, National Chin-Yi University of Technology, Taichung 41170, Taiwan.

ORCID-Profile: Hua-Pin Chen

Zitieren

APA

Chen, H. P., Wey, I. C., Chen, L. Y., Wu, C. Y., & Wang, S. F. (2023). Design and Verification of a New Universal Active Filter Based on the Current Feedback Operational Amplifier and Commercial AD844 Integrated Circuit. Sensors, 23(19), 8258. https://doi.org/10.3390/s23198258

Vancouver

Chen HP, Wey IC, Chen LY, Wu CY, Wang SF. Design and Verification of a New Universal Active Filter Based on the Current Feedback Operational Amplifier and Commercial AD844 Integrated Circuit. Sensors. 2023;23(19):8258. doi:10.3390/s23198258

BibTeX
@article{Chen2023,
  author = {Chen, Hua-Pin and Wey, I-Chyn and Chen, Liang-Yen and Wu, Cheng-Yueh and Wang, San-Fu},
  title = {Design and Verification of a New Universal Active Filter Based on the Current Feedback Operational Amplifier and Commercial AD844 Integrated Circuit},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {19},
  pages = {8258},
  doi = {10.3390/s23198258}
}
Kostenlos starten →