EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Accumulated Plastic Deformation Monitoring of Cement Sheath Interface Using Fiber-Optic Bragg Gratings

Yongqin Cheng iD, Yanxin Jin, Xiran Xia, Hui Xie, Shuoqiong Liu, Jiyun Shen

Sensors · 04.06.2026 · 26 (11) · 3572

DOI: 10.3390/s26113572 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 04.06.2026. Verfasst von Yongqin Cheng und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Safety, Qingdao 266000, China. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Major Scientific and Technological Special Project, National Major Scientific and Technological Special Project, Science and Technology Department of Sinopec.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurately characterizing the accumulated plastic deformation of the cement sheath is essential for evaluating wellbore integrity. Fiber Bragg Grating (FBG) technology, noted for its strong immunity to external interference, is employed for in situ monitoring under harsh downhole conditions. This study investigates the accumulated plastic deformation behavior of set cement through uniaxial cyclic loading–unloading tests and proposes a real-time, high-precision, and non-destructive monitoring scheme by integrating FBG sensors into the Casing–Cement–Formation system (CCFS). The results reveal that under uniaxial conditions, cumulative plastic strain increases with stress amplitude, with the plastic strain in a single cycle capable of reaching up to 0.2%. Under identical conditions, FBG measurements exhibit a drift phenomenon, resulting in an error margin of approximately 1.5–2%. Furthermore, within the CCFS, plastic strain exhibits linear accumulation during the initial 2–5 cycles, followed by a deceleration in the accumulation rate. This deceleration is attributed to the redistribution of internal stress induced by plastic strain accumulation. Notably, the addition of silica fume and latex significantly mitigates this deformation. Collectively, these findings validate the effectiveness of FBG technology for downhole integrity assessment and offer a pathway for early failure detection and targeted maintenance.

Schlagwörter

Stichwörter der Autor:innen

Fiber Bragg Gratingcement sheaths cumulative plastic strainmechanical propertiesnon-destructive testingwell integrity

Autor:innen und Institutionen

  • State Key Laboratory of Chemical Safety, Qingdao 266000, China.
  • SINOPEC Research Institute of Safety Engineering Co., Ltd., Qingdao 266000, China.
  • CNPC Engineering Technology R&D Co., Ltd., Beijing 102206, China.

ORCID-Profile: Yongqin Cheng

Förderung

  • the National Major Scientific and Technological Special Project
  • National Major Scientific and Technological Special Project
  • Science and Technology Department of Sinopec

Zitieren

APA

Cheng, Y., Jin, Y., Xia, X., Xie, H., Liu, S., & Shen, J. (2026). Accumulated Plastic Deformation Monitoring of Cement Sheath Interface Using Fiber-Optic Bragg Gratings. Sensors, 26(11), 3572. https://doi.org/10.3390/s26113572

Vancouver

Cheng Y, Jin Y, Xia X, Xie H, Liu S, Shen J. Accumulated Plastic Deformation Monitoring of Cement Sheath Interface Using Fiber-Optic Bragg Gratings. Sensors. 2026;26(11):3572. doi:10.3390/s26113572

BibTeX
@article{Cheng2026,
  author = {Cheng, Yongqin and Jin, Yanxin and Xia, Xiran and Xie, Hui and Liu, Shuoqiong and Shen, Jiyun},
  title = {Accumulated Plastic Deformation Monitoring of Cement Sheath Interface Using Fiber-Optic Bragg Gratings},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {11},
  pages = {3572},
  doi = {10.3390/s26113572}
}
Kostenlos starten →