EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cross-Condition Tool Wear State Monitoring via Multi-Source Sensor Signal Fusion and Supervised Transfer Learning

Yifeng Huang iD, Xikang Lu iD, Daode Zhang

Sensors · 28.05.2026 · 26 (11) · 3423

DOI: 10.3390/s26113423 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 28.05.2026. Verfasst von Yifeng Huang und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tool wear state monitoring under varying operating conditions is important for machining quality and production reliability. However, changes in cutting parameters can shift monitoring-signal distributions and reduce the generalization ability of data-driven models. This paper proposes a cross-condition tool wear state monitoring method based on multi-source sensor signal fusion and supervised transfer learning. X-axis vibration, Z-axis vibration, and spindle current signals are organized as multi-channel time-series inputs. A deep model integrating a multi-scale convolutional neural network, bidirectional long short-term memory, and an attention mechanism is developed to extract discriminative wear-related features. Source-domain pretraining, target-domain warm-up fine-tuning, and source-target joint fine-tuning are organized as a progressive supervised transfer procedure to improve target-condition adaptation. Experiments are conducted on a custom multi-condition dataset using an hp0 + hp1 → hp2 transfer task. Under the unified XZI input configuration, the proposed method outperforms CNN-LSTM, DANN, and CORAL. Input ablation results show that X, XZ, and XZI achieve accuracies of 0.6000, 0.7647, and 0.8588, respectively. In repeated random-seed experiments, the method obtains an Accuracy of 0.7929 ± 0.0499, a Macro-F1 of 0.7292 ± 0.0706, and a Cohen’s Kappa of 0.6542 ± 0.0840. The results demonstrate the effectiveness of multi-source sensor fusion and supervised target-condition adaptation for cross-condition tool wear monitoring.

Schlagwörter

Stichwörter der Autor:innen

cross-condition recognitionmulti-source sensor signal fusionsupervised transfer learningtool wear state monitoring

Autor:innen und Institutionen

  • School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China.

ORCID-Profile: Yifeng Huang, Xikang Lu

Zitieren

APA

Huang, Y., Lu, X., & Zhang, D. (2026). Cross-Condition Tool Wear State Monitoring via Multi-Source Sensor Signal Fusion and Supervised Transfer Learning. Sensors, 26(11), 3423. https://doi.org/10.3390/s26113423

Vancouver

Huang Y, Lu X, Zhang D. Cross-Condition Tool Wear State Monitoring via Multi-Source Sensor Signal Fusion and Supervised Transfer Learning. Sensors. 2026;26(11):3423. doi:10.3390/s26113423

BibTeX
@article{Huang2026,
  author = {Huang, Yifeng and Lu, Xikang and Zhang, Daode},
  title = {Cross-Condition Tool Wear State Monitoring via Multi-Source Sensor Signal Fusion and Supervised Transfer Learning},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {11},
  pages = {3423},
  doi = {10.3390/s26113423}
}
Kostenlos starten →