EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tool Wear Condition Monitoring Method Fusing Time- and Frequency-Domain Features via Cross-Attention

Xingang Xie, Yeteng Li, Zhixuan He, Qian Deng, Yining Zhang, Tingshuo Zhang

Lubricants · 17.06.2026 · 14 (6) · 241

DOI: 10.3390/lubricants14060241 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 17.06.2026. Verfasst von Xingang Xie und 5 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Signals generated during tool wear are nonlinear, non-stationary, and easily affected by machining noise, which makes reliable tool condition monitoring difficult in intelligent manufacturing. To address this issue, this study proposes a tool wear degree classification framework, FCTrans-CA, that fuses time-domain and frequency-domain information through a lightweight cross-attention (CA) bridge. Fast Fourier transform (FFT) is first used to obtain frequency-domain representations. The raw time-domain signals are processed by a multi-scale one-dimensional convolutional neural network (MS-CNN) to extract temporal wear features, while the FFT-derived representations provide complementary spectral cues. These two feature streams are fused by an asymmetric CA module in which frequency-domain features guide the selection of wear-sensitive temporal features. K-means clustering is used to divide the measured flank wear (VB) trajectory of each tool into initial-, normal-, and severe-wear stages, thereby reducing subjectivity in label generation. Experiments on the PHM2010 milling dataset show that FCTrans-CA achieves 99.43% classification accuracy on 40,648 test samples. The results indicate that cross-domain feature interaction improves the separability of wear states and provides a reproducible data-driven route for tool wear monitoring.

Zitieren

APA

Xie, X., Li, Y., He, Z., Deng, Q., Zhang, Y., & Zhang, T. (2026). Tool Wear Condition Monitoring Method Fusing Time- and Frequency-Domain Features via Cross-Attention. Lubricants, 14(6), 241. https://doi.org/10.3390/lubricants14060241

Vancouver

Xie X, Li Y, He Z, Deng Q, Zhang Y, Zhang T. Tool Wear Condition Monitoring Method Fusing Time- and Frequency-Domain Features via Cross-Attention. Lubricants. 2026;14(6):241. doi:10.3390/lubricants14060241

BibTeX
@article{Xie2026,
  author = {Xie, Xingang and Li, Yeteng and He, Zhixuan and Deng, Qian and Zhang, Yining and Zhang, Tingshuo},
  title = {Tool Wear Condition Monitoring Method Fusing Time- and Frequency-Domain Features via Cross-Attention},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {6},
  pages = {241},
  doi = {10.3390/lubricants14060241}
}
Kostenlos starten →